PDA

View Full Version : Scale and--



Alex
12-02-2011, 06:04 PM
Háŋ mitákuyepi!

I was wondering how to go about learning scale for maps, and other important information I should have when making the maps. I can "make" them, but I would like to know about scale etc etc. I have tried google, but I do not know what else to search up besides "map scales" -- in which I found Wikipedia and could not really understand it. :blush: I am also learning about latitude Biomes (this PDF here (http://e23.sjgames.com/item.html?id=XRPFREE2)), but I was wondering if anyone had an tutorials or easy-to understand books to suggest me to learn about it, places for me to start? I'm trying to learn for a lot of reasons -- and I am a VERY committed learner/student -- because I am making a game (would like to create a world map) and a novel (same reason; nearly 6 years in work) and would like my heart and soul to have been present in their creation. :)

Lastly, I would like to ask how one goes about creating a map in Photoshop CS5 from another medium, like paper or a picture. Are there any tutorials on that? I would like to help a friend turn his pixel map into a PS CS5 map and do a few game-map projects as well, to help improve my map skill. :D

Philámayayapi!

Alex~

Silverleaf
12-02-2011, 06:39 PM
Hiya Alex,

I'm sure others will chime in with better information but one way to look at the scale on a map is the relationship between the distance on the map and the distance on the ground. Usually, the relationship is expressed as a fraction e.g. 1/10 000 or a ratio e.g.1:10 000. In plain English this means that 1 unit on the map represents 10,000 of the same unit on the ground.

The unit of measurement is commonly inches (or centimeters). The first number in the scale is always 1, but the second number is different for each scale. Some commonly used scales are:

* 1:24,000 - 1 inch on the map equals 24000 inches in the real world, which is the same as 2,000 feet.
* 1:63,360 - 1 inch equals 1 mile
* 1:50,000
* 1:250,000
* 1:1,000,000

Lastly, when choosing a scale, remember, "bigger is smaller." The bigger the second number, the smaller the scale of the map. More ground is represented on the map, and therefore there is less detail on the map. Conversely, the smaller the second number, the bigger the scale, and more detail can be included on the map.

More info

Compass Dude (http://www.compassdude.com/map-scales.shtml)

*****
As to "creating a map in Photoshop CS5 from another medium, like paper or a picture". You have a couple options:

Scan the plain paper map in with a scanner, save it as a png (pngs have good transparency support), then open up in CS5 and do your work. If a photo that's available on a flash drive/cd-rom/dvd, pull it onto the computer, open it in CS5 and do the same work. Otherwise, scan it in with the Twain feature (from your scanner), and voila!

Hope that helps,

Alex
12-02-2011, 07:23 PM
Wóphila ečhíčiye Silverleaf. :)

I am a little confused by the "first/second" number thing in your post and the link. By "first" and "second" numbers, you mean that "(1:--)" is the first number and always stays as 1, and that "(--:*Number*)" is the second number and can change, yes? I am curious as to why the smaller the second = more detail can be included on the map, but I'll re-read the links.

Should map scale be selected before map creation then, or can scale be applied after the map's creation?


As to "creating a map in Photoshop CS5 from another medium, like paper or a picture". You have a couple options:

Scan the plain paper map in with a scanner, save it as a png (pngs have good transparency support), then open up in CS5 and do your work. If a photo that's available on a flash drive/cd-rom/dvd, pull it onto the computer, open it in CS5 and do the same work. Otherwise, scan it in with the Twain feature (from your scanner), and voila!

Hope that helps,

How does one go about getting the land's shape to come out like the shape/edges of the maps, for example, generated in Saderan's tutorial? I have run a scanned image in through Photoshop but I cannot figure out how to do the next steps on an existing image... :(

Thanks again, :)

Alex~

Silverleaf
12-02-2011, 07:59 PM
I am a little confused by the "first/second" number thing in your post and the link. By "first" and "second" numbers, you mean that "(1:--)" is the first number and always stays as 1, and that "(--:*Number*)" is the second number and can change, yes? I am curious as to why the smaller the second = more detail can be included on the map, but I'll re-read the links.

That is correct - the first number is always a "1". As to the 2nd number - the examples I'm going to refer to here are very simple (and not entirely accurate) - but are used to explain the difference in the last number of our scale:

Lets imagine you are flying up in a hot air balloon and you take a photo of a forest from 200 feet directly above it. The amount of detail in that photo shows individual branches, leaves, and perhaps even the ground beneath. That scale is 1:200 -and would be called a LOCAL map.

Now, take that same photo from 5000 feet up. While you can see that same forest, you can't make out individual branches, leaves etc. You can see MORE of the forest, but small details tend to fade away. That scale would be 1:5000 and would be called a REGIONAL map.

Go 30,000 feet up and take that same photo again. Now that same forest is a small patch, and details of it specifically blend in with the surrounding countryside. The scale would be 1:30,000 and would be called a CONTINENT map.

Does that help?


Should map scale be selected before map creation then, or can scale be applied after the map's creation?

IF your doing an entire continent - say the size of the United States - then the scale could be 1:250,000 - if however your doing a map that features a Castle and the surrounding village - then 1:5000 might be sufficient. But the short and fast answer I lean towards is it depends on the type of map your making. Once you know that, then you can decide what scale you need it to be.

What are the different types (these are brief examples)

Continental (a map of an entire continent)
Regional (a map of a village on the above continent, and its surrounding farmlands)
Local (a single blacksmith shop in the village mentioned above)


How does one go about getting the land's shape to come out like the shape/edges of the maps, for example, generated in Saderan's tutorial? I have run a scanned image in through Photoshop but I cannot figure out how to do the next steps on an existing image

If your referring to this tutorial:
http://www.cartographersguild.com/showthread.php?8086-Award-Winner-Saderan-%96-a-tutorial

Thats a solid question and I'd check the thread in question for a possible answer - maybe even asking the question in it- or Private Message Saderan himself and ask. I don't use Photoshop, so I'm less than useless when it comes to handing out advice on it. I'm sure others will chime in that can answer your specific questions soon.

Hope that helps,

Alex
12-03-2011, 10:20 PM
That is correct - the first number is always a "1". As to the 2nd number - the examples I'm going to refer to here are very simple (and not entirely accurate) - but are used to explain the difference in the last number of our scale:

Lets imagine you are flying up in a hot air balloon and you take a photo of a forest from 200 feet directly above it. The amount of detail in that photo shows individual branches, leaves, and perhaps even the ground beneath. That scale is 1:200 -and would be called a LOCAL map.

Now, take that same photo from 5000 feet up. While you can see that same forest, you can't make out individual branches, leaves etc. You can see MORE of the forest, but small details tend to fade away. That scale would be 1:5000 and would be called a REGIONAL map.

Go 30,000 feet up and take that same photo again. Now that same forest is a small patch, and details of it specifically blend in with the surrounding countryside. The scale would be 1:30,000 and would be called a CONTINENT map.

Does that help?

Yes, that certainly explains why the smaller the number, the more detail it has. Philámayaye Silverleaf. :)


IF your doing an entire continent - say the size of the United States - then the scale could be 1:250,000 - if however your doing a map that features a Castle and the surrounding village - then 1:5000 might be sufficient. But the short and fast answer I lean towards is it depends on the type of map your making. Once you know that, then you can decide what scale you need it to be.

What are the different types (these are brief examples)

Continental (a map of an entire continent)
Regional (a map of a village on the above continent, and its surrounding farmlands)
Local (a single blacksmith shop in the village mentioned above)


I see. :!: Well for me I'm doing a world map (would the continental scale be good?), but would like to have a scale for the full version and a scale for cut versions of let's say different continents. If that makes sense...? :oops:

Does the size of the map (canvas size) matter -- actually, I mean does it mess with the scale -- when it comes to scale?


If your referring to this tutorial:
http://www.cartographersguild.com/sh...%96-a-tutorial

Thats a solid question and I'd check the thread in question for a possible answer - maybe even asking the question in it- or Private Message Saderan himself and ask. I don't use Photoshop, so I'm less than useless when it comes to handing out advice on it. I'm sure others will chime in that can answer your specific questions soon.

Hope that helps,
Yes, that is exactly what I was referring to! :) Alright, I shall try to ask there.

Alex~

Hai-Etlik
12-04-2011, 02:17 AM
I see. :!: Well for me I'm doing a world map (would the continental scale be good?), but would like to have a scale for the full version and a scale for cut versions of let's say different continents. If that makes sense...? :oops:

Does the size of the map (canvas size) matter -- actually, I mean does it mess with the scale -- when it comes to scale?

Yes, obviously a larger physical map can cover the same extent ("Extent" is the area that a map covers) at a larger scale, or a larger extent at the same scale.


You should be aware that if you want to fit an entire globe into a map, you are going to run into problems. The larger the extent, the more distortion is involved in flattening the globe into a map. (What kind of distortion will depend on the way you flatten it. The ways of flattening a map are called "projections") With an unbroken map, any full world map is going to massively distort scale, and at least one of shape or area. If you want consistent scale, you will need a map with breaks in it (like when you peel an orange and lay it flat) The more breaks, the less distortion. The Interrupted Goode Homolosine and Dymaxion projections are well known examples of interrupted maps (http://en.wikipedia.org/wiki/Goode_homolosine_projection http://en.wikipedia.org/wiki/Dymaxion_map)

Also, the projections suitable for a full globe aren't at all suitable for a continent. This means you can't just crop a section out of a world map, scale it up, and add detail. The result will be distorted. There is software to convert between projections. NASA's G.Projector is one of the simpler ones, and is free and multiplatform, but it has the downside that any input into it must be in a particular projection (Equidistant Cylindrical) Other software can convert from most projections to any other projection, but it tends to be more complex to use. (I use QuantumGIS or GDAL myself)

Also, projection conversion can produce ugly results for "styled" maps or maps with labels. It's best to project raw data and then style it as needed for the particular projection.

Of course you can ignore all that and draw something that looks pretty and resembles a map. Sometimes something that looks like a map works just fine. However, if you want to get it right, so that you can do fun things like put your map on a 3d sphere you can rotate on screen, or if you just have a persnickety streak and want to do things correctly for the sake of doing them correctly, then it gets complicated, and it's the kind of thing you need to worry about at the beginning, not something you can slap on at the end as a quick fix.

Alex
12-04-2011, 02:50 AM
Firstly; thank you very much for the reply Hai-Etlik. I appreciate it very much. :)

Secondly & Lastly; Oh yes, I know this isn't something you can just get overnight, or something you can slap on for a quick fix. I know it takes time to understand scale etc etc, and I am very willingly to learn about it all. I am a very committed person, so when I sit down to do something, I really sit to do it and learn it. :blush: I must admit I do have difficulties understanding things sometimes (a lot of the time I cannot help reading things backwards or wrong -- I am dyslexic), but I really want to learn. I want my worlds to be fresh, realistic and as stated, made with the soul and heart. :lol:


Of course you can ignore all that and draw something that looks pretty and resembles a map. Sometimes something that looks like a map works just fine. However, if you want to get it right, so that you can do fun things like put your map on a 3d sphere you can rotate on screen, or if you just have a persnickety streak and want to do things correctly for the sake of doing them correctly, then it gets complicated, and it's the kind of thing you need to worry about at the beginning, not something you can slap on at the end as a quick fix.

So yes, I do want to do those fun things and would very much like to do it correct *since it is too late for the map of my novel...*. :) May I ask for suggestions on where to start for someone who has little to no knowledge of it? Perhaps books to buy/rent *that doesn't read as if its assuming you are a professor or something lol*, or easier sites I can check out? I have tried wikipedia, but seldom do I understand it... :(

Thank you & good day,

Alex~

Hai-Etlik
12-04-2011, 04:30 AM
So yes, I do want to do those fun things and would very much like to do it correct *since it is too late for the map of my novel...*. :) May I ask for suggestions on where to start for someone who has little to no knowledge of it? Perhaps books to buy/rent *that doesn't read as if its assuming you are a professor or something lol*, or easier sites I can check out? I have tried wikipedia, but seldom do I understand it... :(

Well I learned most of it in university (I've studied Computer Science, Mathematics, and Geography) and by reading Wikipedia, Wolfram, and other websites. The math on most of the Wikipedia pages for instance really isn't that hard. Undergrad level at worst (My own math knowledge is pretty much all undergrad level) and plenty of it is high school level.

So, if you want to approach it via math, you might want to try working on your geometry (Particularly Spherical and Analytic Geometry) and trigonometry, say at Khan Academy.

Otherwise, it's a matter of trying to remember a bunch of odd things that don't seem all that related. It's possible to deal with without a mathematical understanding, but it's harder to have a clear idea of what's going on. Since I didn't learn that way, I can't give a lot of advice.

I'll try to walk you through a few basic projections and what their good and bad points are.

The most basic form of projection is probably what's called "Gnomonic Azimuthal" It's the basis of the Dymaxion projection I mentioned above, but it's rarely used directly. Basically, you can think of it this way: you take your flat map, touch it to the globe at one point, stick a light at the centre of the globe, and "project" the features on the surface of the globe onto the map, then trace. Obviously it has the problem that you can't fit the entire globe on the map. You can't even fit an entire hemisphere on a map as the light going through the globe 90° from the central point is perpendicular to the map and will never reach it. Also, the further from the point of contact you get, the more distorted the map gets.

Another simple one is called "Equidistant Cylindrical". It can be varied a bit, but the simplest form is called "Platee Carre" and works like this, you take the longitude, and that's left and right on the map, and you take the latitude, and that's north-south on the map. The map is essentially wrapped around the equator in a cylinder, and then the light used to project it is 'curved' to make north-south distances work to a fixed scale (All other distances are distorted). You can vary it by making the cylinder smaller so it cuts through the Earth, and you can tilt it so it doesn't wrap around the Earth's axis but these are much less common. This projection gives the higher latitudes an ugly "stretched out" look. If you use it, you have to draw that distortion into the map, otherwise when you convert to another projection, or put it on a sphere, you will see the opposite distortion (The poles will look "pinched").

Besides wrapping the map in a cylinder, or laying it flat at a point, you can also wrap it around in a cone. This is good for smallish continents or similar sized extents in middle latitudes. Canada and Europe are often mapped with conic projections. If you see "Conic", "Cylindrical", or "Azimuthal", they mean "Wrapped in a cylinder", "Wrapped in a cone", and "Laid flat" respectively. The also have standard shapes, Cylindrical maps are Rectangles, Conic maps are Fan shaped, and Azimuthal maps are Circular, though you can crop a part of the map to any shape you want.

Probably the simplest projection that's fairly widely used for serious maps, is Stereographic Azimuthal, which is often used for maps of the poles. It's much like the Gnomonic Azimuthal above, except that the light is on the far side of the globe from the map (The "antipode") rather than the centre. This can fit a hemisphere onto a finite map, but not a full globe. It also has a very useful property called "conformality". A conformal map preserves angles. If two roads meet at 45° on the surface of the earth, then the roads on a conformal map will also meet at 45°. In a more vague sense you can think of conformality as preserving "shape". It does this by distorting area. The further you get from the centre, the bigger things are drawn. (Gnomonic does this too, but it does it too much and so isn't conformal)

There is also a conformal cylindrical projection, and it is called Mercator, after a cartographer who developed it. When wrapped around the axis (What's called the "Normal Aspect") it also preserves compass directions and is the ONLY projection which does so. This is why it was used for early marine charts when the only navigational instrument available was a magnetic compass. It's also used by zoomable web maps like Google Maps where it's useful to be able to zoom in and get something that's mostly the right shape. It makes things bigger as you get further from the equator though, and the poles are infinitely far away. If you've seen the traditional rectangular wall map of the world that shows Greenland as being as big as Africa, that's Mercator.

There's also a Conformal Conic ("Lambert's Conformal Conic" or "LCC") which I won't go into. There are equal area and equidistant projections for all three shapes, with Equal Area squashing shapes more to keep areas equal, and equidistant sort of sitting in between.

There are also projections that are neither Cylindrical, Conic, nor Azimuthal. These often have elliptical or oblong shapes but they can vary a lot and most are purely for mapping full globes while trying to balance distortion of area, distance, and shape. Most modern full world maps use one of these, with Winkel Tripel and Robinson being popular.

If you don't mind a labour intensive solution that gives imprecise results, you could try drawing your world map in a suitable projection, with a graticule (A grid of latitude and longitude lines) and then set up a blank map covering the area of a region you want a map of with a graticule for a suitable projection (say a conic for a mid latitude continent) and then use the two grids to transfer the shapes on the map across. All you need are suitable graticule templates. I've drawin up templates for Normal Mercator and Equatorial Stereographic Azimuthal here http://www.cartographersguild.com/showthread.php?14805-Mecator-Map-Vector-Template and I'm working on a program to draw Equidistant Conic graticules for any particular latitude range for larger scale maps of continents. For very large scale maps, it gets a lot simpler as you can mostly pretend it's flat.

Alex
12-04-2011, 10:02 PM
Wow, thanks for the really informative post! :D I am not yet in college, so I do not have the school resources. I can, however, buy the books/need things or rent them. *live in the mountains away from big cities :P* So if there are any suggested materials, I can still get them.

Geometry and trigonometry? Alright then, I'll work on them. Just my luck its on something I'm terrible at! :lol: Oh well then, onto it!


If you don't mind a labour intensive solution that gives imprecise results, you could try drawing your world map in a suitable projection, with a graticule (A grid of latitude and longitude lines) and then set up a blank map covering the area of a region you want a map of with a graticule for a suitable projection (say a conic for a mid latitude continent) and then use the two grids to transfer the shapes on the map across. All you need are suitable graticule templates. I've drawin up templates for Normal Mercator and Equatorial Stereographic Azimuthal here http://www.cartographersguild.com/sh...ector-Template and I'm working on a program to draw Equidistant Conic graticules for any particular latitude range for larger scale maps of continents. For very large scale maps, it gets a lot simpler as you can mostly pretend it's flat.
Imprecise results...? How imprecise are they to the other solutions then? :)

Much thank yous for the link and templates *good job by the way!*, Hai-Etlik! :o So I would just draw in the continues of the world into your templates (no order?) yes? Or are the more steps? :?:

With this knowledge in mind, then, would it be a mistake to keep my novel's map?

I appreciate all the help!

Alex~

Hai-Etlik
12-05-2011, 01:23 AM
Wow, thanks for the really informative post! :D I am not yet in college, so I do not have the school resources. I can, however, buy the books/need things or rent them. *live in the mountains away from big cities :P* So if there are any suggested materials, I can still get them.

Well, like I said, most of my learning has been either in uni, via lectures and course specific notes or maybe the occasional text book. Or by reading online resources usually targetting people with a basic understanding of mathematics (beyond mere numeracy and arithmetic, but still within the capabilities of advanced high school math in most cases, or undergrad level otherwise) If anything, I'd suggest you looks for books on the history of cartography. Introductory Geography text books, preferably used so you don't spend a ridiculous amount, may be a good idea if you can track them down.


Geometry and trigonometry? Alright then, I'll work on them. Just my luck its on something I'm terrible at! :lol: Oh well then, onto it!

Well, that's just the most direct way to understand it. You can still do it right without a mathematical understanding, it's just easier to do with such an understanding, at least in my admittedly somewhat biased opinion as a bit of a math geek.


Imprecise results...? How imprecise are they to the other solutions then? :)

That depends on how dense the graticules you are using are, how good your eye is, how steady your hand is, and how careful you are. It's like placing a grid over an image, and another grid on a blank page, and then drawing the image on the blank page using the grids as a guide, except that the two grids are distorted compared to one another. Depending on the context, that very imprecision may be something you want. Early cartographers didn't have access to modern surveying and drafting capabilities so they had to freehand it over grids like this so if you want to mimic them, you probably don't want to be too precise.


Much thank yous for the link and templates *good job by the way!*, Hai-Etlik! :o So I would just draw in the continues of the world into your templates (no order?) yes? Or are the more steps? :?:

I'm not entirely sure what you are asking here.

If you want to try this method, you would draw things in on the world map, keeping in mind how the projection distorts things. The Mercator template makes things bigger at the higher latitudes, and the Stereographic one makes things bigger toward the edges. Then, when you want to draw a map in another projection, you would lay a graticule for that projection over your canvas, and draw the features from the original map using the two different graticules as guides. If a coastline crosses 120° W at about 45° N, on the first map, then you would draw the corresponding coastline crossing 120° W at about 45° N on the new map.


With this knowledge in mind, then, would it be a mistake to keep my novel's map?

That's your call. You haven't posted it so I don't really know anything about it. Even having looked at it, the best I could do is point things that might be relevant to your making the decision.

Alex
12-05-2011, 03:36 PM
Well, like I said, most of my learning has been either in uni, via lectures and course specific notes or maybe the occasional text book. Or by reading online resources usually targetting people with a basic understanding of mathematics (beyond mere numeracy and arithmetic, but still within the capabilities of advanced high school math in most cases, or undergrad level otherwise) If anything, I'd suggest you looks for books on the history of cartography. Introductory Geography text books, preferably used so you don't spend a ridiculous amount, may be a good idea if you can track them down.

Alright, thanks. :) I'll look for some books on cartography and Introductory Geography -- Hopefully a library has them so I don't have to buy them. :((


Well, that's just the most direct way to understand it. You can still do it right without a mathematical understanding, it's just easier to do with such an understanding, at least in my admittedly somewhat biased opinion as a bit of a math geek.
I would still like to learn the direct way, so its on the list to learn. But I would also like to know of the other options for right now. Where might I go to learn of them?


That depends on how dense the graticules you are using are, how good your eye is, how steady your hand is, and how careful you are. It's like placing a grid over an image, and another grid on a blank page, and then drawing the image on the blank page using the grids as a guide, except that the two grids are distorted compared to one another. Depending on the context, that very imprecision may be something you want. Early cartographers didn't have access to modern surveying and drafting capabilities so they had to freehand it over grids like this so if you want to mimic them, you probably don't want to be too precise.

So the imprecision isn't that bad (in terms of what I mentioned above) to mimic? I could be careful, but I'm not sure if my eyes are good enough to catch. But practice and learning makes perfect, I say.


I'm not entirely sure what you are asking here.

If you want to try this method, you would draw things in on the world map, keeping in mind how the projection distorts things. The Mercator template makes things bigger at the higher latitudes, and the Stereographic one makes things bigger toward the edges. Then, when you want to draw a map in another projection, you would lay a graticule for that projection over your canvas, and draw the features from the original map using the two different graticules as guides. If a coastline crosses 120° W at about 45° N, on the first map, then you would draw the corresponding coastline crossing 120° W at about 45° N on the new map.
:blush: I misspelled in my post and just read what I'm said. Sorry about not being clear. :((

I meant "are there steps to follow for your templates? Like which template you start in first etc etc"?


That's your call. You haven't posted it so I don't really know anything about it. Even having looked at it, the best I could do is point things that might be relevant to your making the decision.
Oh? Then I will try to finish it and post it. *I guess if its bad, I'll re-write it all. :p*

Alex~

Hai-Etlik
12-05-2011, 10:17 PM
I would still like to learn the direct way, so its on the list to learn. But I would also like to know of the other options for right now. Where might I go to learn of them?

The books about the history of cartography, and the intro geography texbooks I mentioned would be my suggestion. Like I said, I didn't learn it this way so I don't have much advice.


I meant "are there steps to follow for your templates? Like which template you start in first etc etc"?

They are just SVG images. You can load them into any editor that supports SVG. They do have some extensions that should give you a basic layer structure to build from if you load it in Inkscape, which is the editor I use. Both are intended for full globes so either would be a good starting point. The Mercator template is probably easier to work with. I'm working on a Ruby program to generate graticules for the Equidistant Conic projection suitable for continents.

Alex
12-06-2011, 01:28 AM
The books about the history of cartography, and the intro geography texbooks I mentioned would be my suggestion. Like I said, I didn't learn it this way so I don't have much advice.
I haven't found anything for the history of cartography, but I have found "The Complete Idiot's Guide to Geography". Hopefully that will be a good choice. xD


They are just SVG images. You can load them into any editor that supports SVG. They do have some extensions that should give you a basic layer structure to build from if you load it in Inkscape, which is the editor I use. Both are intended for full globes so either would be a good starting point. The Mercator template is probably easier to work with. I'm working on a Ruby program to generate graticules for the Equidistant Conic projection suitable for continents.
Oh, so there are no special rules to follow? Like placement? I'll try drawing my world on it now, was messing with the files. GIMP loads them (good that I did not encounter some errors -- my GIMP acts weird since its reinstall), tried Inkscape but it won't install for me. >.>

Ruby program? As in the Ruby programming language? If so, I have heard of it, and seen it in action. I have not learned it, of course. :P I give you, sir (?), a super thumbs up for that and giant "good luck". :D

Alex~

Hai-Etlik
12-06-2011, 02:59 AM
Oh, so there are no special rules to follow? Like placement?

Well they both distort size. On Mercator, things get bigger toward the poles, and on Stereogrpahic they get bigger the further you get from the centre. Also mercator doesn't go all the way to the poles and it distorts them all the way to infinity.

There are of course particular ways that continents form and the shapes and relationships they take on, but that's Geology which is a completely different field. What we've been talking about is Geodesy. A Magical Society: Guide to Mapping (which you evidently already have) is also good and should serve you well. If you want more detail, a book on Physical Geography. I snagged a first year Pys Geo textbook at a used bookstore and it's quite helpful.

Dealing with the shape of the world in a satisfactory way involves some alien concepts, but they are fairly simple once you get them and it's not too much work to implement it to a reasonable degree of accuracy (for fantasy mapping). Once you get to physical geography, you are looking at a whole new situation. There's always another factor to consider and another detail tempting you to incorporate it. It's tempting to map out the tectonics in more detail, to refine the climate model to incorporate some additional influence like seasonal variation. This can be a bottomless pit of study, research, and effort if you aren't careful. Just be ready to say "that's good enough". Chances are, few people will notice if your monsoons are off course or if the arc of a subduction zone is wrong. Remember that this is just one end of a spectrum, and at the other end are people with PhDs and research fellowships developing massively complex and detailed models of specific real world fault systems or 1 square km sections of rainforest.

Lukc
12-06-2011, 03:30 AM
Listen to Hai Etik :) if he says "it's good enough", he's probably right.

Alex
12-06-2011, 10:00 PM
My copy of "A Magical Society: Guide to Mapping" is only 37 pages long (got it from the site for free), but I am going to get the full book soon, hopefully (Linguistics and Lakhota textbooks keeps taking my money :P). The only books I have currently on Physical Geography is Essentials of Physical Geography by Robert E. Gabler, James F. Petersen, and L. Machael Trapasso and a pretty beaten copy of Introducing Physical Geography by Alan H. Strahler, which I hope will suffice. I just checked Amazon (and others), and books on it sell around 90$ to 70$ used. My my! :lol:


Dealing with the shape of the world in a satisfactory way involves some alien concepts, but they are fairly simple once you get them and it's not too much work to implement it to a reasonable degree of accuracy (for fantasy mapping). Once you get to physical geography, you are looking at a whole new situation. There's always another factor to consider and another detail tempting you to incorporate it. It's tempting to map out the tectonics in more detail, to refine the climate model to incorporate some additional influence like seasonal variation. This can be a bottomless pit of study, research, and effort if you aren't careful. Just be ready to say "that's good enough". Chances are, few people will notice if your monsoons are off course or if the arc of a subduction zone is wrong. Remember that this is just one end of a spectrum, and at the other end are people with PhDs and research fellowships developing massively complex and detailed models of specific real world fault systems or 1 square km sections of rainforest.

I'll study up on the books I do have, and then check to see if my library has any books on introductory geography. If not, I'll check out book-boxes (local book dumps at schools; they get rid of older copies of books etc etc).

@bolded:
Oh my! Then I will be extra careful when it comes to that, though I wouldn't mind learning more of it -- its the way I am. xD

@Lukc:
I am. :) *unless I am coming off that I'm not? :blush:*