Results 1 to 7 of 7

Thread: HS1 The Slaying Stone encounter maps

  1. #1
    Guild Artisan Jacktannery's Avatar
    Join Date
    Jun 2011
    Location
    Dublin, Ireland
    Posts
    822

    Default HS1 The Slaying Stone encounter maps

    This is a set of encounter maps I made to run the 4th Edition Dungeons and Dragons module 'HS1 The Slaying Stone' published by WotC. I was aiming for an autumnal theme for the outside maps. The later encounters are better than the earlier ones, as I learned how to use GIMP.

    The maps are made from scratch using free textures and resources downloaded from the intergoogleweb, including some from this forum, for example Bogie's excellent map tables. All maps are as described in the module except the library, to which I added a balcony because libraries should always have balconies.

    I did not make encounter maps for encounters 11 and 12 because I plan on using those created by Wonko the Sane here http://www.cartographersguild.com/sh...-Slaying-Stone. His last two are particularly good and also have the same autumnal theme.

    The WIP thread for these maps is here http://www.cartographersguild.com/sh...ing-Stone-maps, and ungridded versions can be downloaded there but the finished maps posted below are the most recent versions. I have also added a handout that I made for the PCs describing the history of the town.

    Encounter 11 Shrine of the Moon Time your players so that they arrive here at night-time.

    HS1 The Slaying Stone encounter maps-encounter-11-shrine-moon.png

    Encounter 9: Krayd the Butcher I de-emphasised the 'stairs' up to the platform, because these are quite hard to climb and the encounter notes that the scaffolding holding up the platform can be climbed on any side.

    HS1 The Slaying Stone encounter maps-encounter-9-krayd-butcher.png

    Encounter 8: Goblin Wolf Brigade This takes place in the stables.

    HS1 The Slaying Stone encounter maps-encounter-8-goblin-wolf-brigade.png

    Encounter 7: Monsters and Manuals I added a balcony around the main floor, because libraries always have balconies, and because it adds an extra tactical element for a battle that requires the big-bad to run around and avoid melee contact with the PCs. I also include my terrain notes on this encounter.

    HS1 The Slaying Stone encounter maps-encounter-7-monsters-manuals.jpg HS1 The Slaying Stone encounter maps-terrain-notes.jpg

    Encounter 6: Unearthed Pets I have also included two overlays for the two central buildings.

    HS1 The Slaying Stone encounter maps-encounter-6-unearthed-pets-grid.jpg HS1 The Slaying Stone encounter maps-encounter-6-unearthed-pets-house-open.jpg HS1 The Slaying Stone encounter maps-encounter-6-unearthed-pets-house-open1.jpg

    Encounter 5: Vermin Infestation Particularly proud of the mechanism for the portcullis.

    HS1 The Slaying Stone encounter maps-encounter-5-vermin-infestation.png

    Encounter 4: Kobold Slums (see WIP thread for version without secret passage) (note: small map)

    HS1 The Slaying Stone encounter maps-encounter-4-kobold-gutternsipes.png

    Encounter 1: Hungry Wolves (note: small map)

    HS1 The Slaying Stone encounter maps-encounter-1-hungry-wolves.png

    PC Handout regarding the history of Kiris Dahn and module background.

    HS1 The Slaying Stone encounter maps-kiris-dahn-handout.jpg
    Last edited by Jacktannery; 03-30-2012 at 11:59 AM.

  2. #2
    Guild Journeyer dangerdog15's Avatar
    Join Date
    Jul 2009
    Posts
    240

    Default

    Wow, these are very pretty. I would play this game.

  3. #3
      sasigns is offline
    Guild Applicant
    Join Date
    Jul 2012
    Posts
    3

    Default

    These maps are very nice kudos! Question though are they the right size to use with standard minis?

  4. #4
    Guild Artisan Jacktannery's Avatar
    Join Date
    Jun 2011
    Location
    Dublin, Ireland
    Posts
    822

    Default

    No - they are all over the shop in terms in size. They were the first maps I ever did, and some are problematic.

    In any case, the 'right size to use with minis' can always be fixed - you can scale and print maps out to the sizes that you want. I believe for minis you need 1 grid square to an inch. The scale of these maps vary but I checked the last one and it is 1 grid square = 0.83 of an inch for my printer (note - the final scale of the printed image depends on two things: the scale of the digital image, and the printer settings). This is pretty close (the map is a little too big, and should be scaled down slightly).

  5. #5
      sasigns is offline
    Guild Applicant
    Join Date
    Jul 2012
    Posts
    3

    Default

    Thank you again

  6. #6
      sasigns is offline
    Guild Applicant
    Join Date
    Jul 2012
    Posts
    3

    Default

    Are there maps for encounters 2 and 3? I am not the DM and have not read the material just the guy with access to the free color printer lol

  7. #7
    Guild Artisan Jacktannery's Avatar
    Join Date
    Jun 2011
    Location
    Dublin, Ireland
    Posts
    822

    Default

    No, encounters 2 & 3 are non-combat exploration-type challenges.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •