Results 1 to 4 of 4

Thread: The Tower of Voliodian Ghagnasdiak - kinda

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Guild Artisan damonjynx's Avatar
    Join Date
    Aug 2012
    Location
    Sydney, Australia
    Posts
    811

    Map The Tower of Voliodian Ghagnasdiak - kinda

    Hi all and sundry,

    After a bit of a lay-off I'm back to GM'ing my Elric of Melnibone campaign using the MRQII/legend rules with some Runequest 6 thrown in for good measure. Anyhow, here is a WIP of the Tower. Note: from the outside the tower appears to be about 15 metres tall and triangular in shape with walls approximately 20 metres long. The scale of the grid is 1 sq = 1 mtr, so the interior is actually an inter dimensional space. The map is fairly large A1 size (original at 300ppi, this one is at 150 ppi). I'm going to print it at work on our A1 plotter (B&W).
    Enjoy.

    Click image for larger version. 

Name:	TowerOfVoloidian2.jpg 
Views:	552 
Size:	2.37 MB 
ID:	48954

    Edit: I realise I've made a major error. Printing it as is, is not going to give me an A1 battlement. The room sizes are 1/2 what they should be. The grid in PS is set to 1 inch squares, but I scaled the map grid to 1/2 that to give me 2 squares per inch. Damn.
    Last edited by damonjynx; 10-11-2012 at 07:21 AM. Reason: Additional info.
    Glory is the reward of valour.

    My blog at: damonjynx.blogspot.com.au

    Finished Maps

  2. #2
    Guild Artisan damonjynx's Avatar
    Join Date
    Aug 2012
    Location
    Sydney, Australia
    Posts
    811

    Default

    An update. As the original map was not drawn to the correct scale I've decided to ditch the above and create a simple 4 level rectangular tower. This is just the base layout of the tower. Starting from top left going clockwise, Ground Floor, Level 1, Level 2, Basement.

    Click image for larger version. 

Name:	VGMk2.jpg 
Views:	178 
Size:	333.7 KB 
ID:	49016

    I'm using PS CS4. I created the basic buildings using the rectangular marquee tool, filled them with white and then stroked them at 25px (file is 23" x 3"" 100px pi).

    The internal walls I've done using a 5px pencil.

    Does anyone know if it's possible to get the stroke to do a 'square' external corner, rather than a rounded one?

    I've deliberately left the space on the side for a map key when finished.

    The techniques I'm using are fairly basic, but being a newb to PS I wouldn't have been able to get this far without the tuts on this site. So thanks to all the tut posters!

    Below is the un-furnished, completed tower. I, personally like the old-school look, so if I do any mods it'll be for practice more than anything else.
    Click image for larger version. 

Name:	VGMk2WIP2.jpg 
Views:	123 
Size:	318.1 KB 
ID:	49038
    Last edited by damonjynx; 10-11-2012 at 07:18 AM. Reason: Completed
    Glory is the reward of valour.

    My blog at: damonjynx.blogspot.com.au

    Finished Maps

  3. #3
    Community Leader Lukc's Avatar
    Join Date
    Sep 2011
    Location
    Seoul, South Korea
    Posts
    1,573

    Default

    Well, for square corners: Get Square Corners on a Stroke That ... it's a bit of a workaround, but should work!

  4. #4
    Guild Artisan damonjynx's Avatar
    Join Date
    Aug 2012
    Location
    Sydney, Australia
    Posts
    811

    Default

    Thanks Lukc, that helped a lot.
    Glory is the reward of valour.

    My blog at: damonjynx.blogspot.com.au

    Finished Maps

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •