Results 1 to 9 of 9

Thread: CC3: Change map scale?

Hybrid View

  1. #1

    Help CC3: Change map scale?

    Next noob question came over me pretty quickly:

    I'm drawing a piece of the 3.5 Forgotten Realms map into CC3 for my players, and huzzah, I drew it from a map inside the book, which naturally displayed a wrong scale So for the map to work for me correctly, I need to change the overall scale of the map as well as making it appear on the scale symbol i put onto the map as I created it. You guessed it: how to?

  2. #2
    Community Leader NeonKnight's Avatar
    Join Date
    Aug 2007
    Location
    Surrey, Canada, EH!
    Posts
    5,025

    Default

    Well, first you need to figure out, is it TOO BIG or TOO SMALL?

    If too small, by how much? Let's say you figure out the map should be 500 miles across, and you have it 250 miles across. That's a calculates out that the new scale needs to mathmatically be 2x larger than the old map. Use the SCALE button to the left of the screen and select all (make sure everything i unfrozen on the layers, and all sheets/layers are shown), then type in the command bar 2 (for the size time) and for a scale point I always choose 0,0 (doesn't really matte but all map templates start with 0,0 as lower left).

    Same for Shrinking the map.
    Daniel the Neon Knight: Campaign Cartographer User

    Never use a big word when a diminutive one will suffice!

    Any questions on CC3? Post them with CC3 in the Subject Line!
    MY 'FAMOUS' CC3 MAPS: Thunderspire; Pyramid of Shadows; King of the Trollhaunt Warrens; Demon Queen's Enclave

  3. #3

    Post

    I want to change the scale of the map to x2, that is I want to change the dimensions of the map so that the present W 80 miles, H 50 miles become W 160 miles, H 100 miles, if that's any help.

    I pressed scale, selected all from corner to corner, making sure nothing was locked, right clicked, selected 'do it' and typed in 0,0 for scale point, then 2 for the scale change. Now I think it went all right, except for one part: all text I've drawn on curved lines went too big and out of place. And the scale bar is still set to 0-5miles, which I assume is appropriate for a map half the new size.

    Isn't there a way to just go back to and change the initial selection of map dimensions? No property tab for the whole map I can't locate?
    Last edited by Zimith; 02-27-2009 at 08:41 AM.

  4. #4

    Post

    Here is what you hit or very very similar. I just did it with these written directions on my desk a few days ago.

    Edit
    Reshape
    Scale (Select all)
    -you may have to hit do it
    -in the command line its waiting for you to type in x,y go ahead and type in 80,160 or whatever numbers you need.
    Do It and your done.

    I redid one from 10,000 x 8000 so you should not have issues with a smaller scale.

    Not too bad, g'luck
    JJ

  5. #5

    Post Nah

    When I type in the dimensions in miles rather than the new scale (x2), I loose my selection and nothing happens.

    I suppose I could just change the scale bar from 0-10, rather than 0-5 and make the grid half size, and just double any distances I want the program to calculate for me. Thanks anyways!

  6. #6
    Guild Member
    Join Date
    Jan 2009
    Location
    Amiens, France
    Posts
    62

    Post

    If you want to have CC3 double the size of your map and be able to keep calculating distances and such, try this one:

    In the menu bar, select File>Drawing properties.

    Then, in the dialog box, select "map units" (or something like this).

    There, you will see a setting for correspondance between inches and distance units. Change this value (in your case, I think you should put 0.5).

    Click OK. You can check if it worked by using Info>Distance on the total width of the map. The result should now be double than initial. If not, it means I am wrong and you should put 2 in the above-mentionned dialog box .

    Your scale bar symbol will not update automatically, though.

    Delete it, click on the icon right above your symbol list, on the left side. This will display all symbols that have been used previously in the drawing. Select your scale bar.

    This will open a dialog box. Replace the word "Scale" by the length (in map units) of the scale bar. In your case, it should be double than on your original drawing. Position the scale bar symbol on your map. You're done.


    There may be some inaccuracies in my explanations above as I have no access to CC3 right now, but I had a similar problem on one of my maps recently and I played with these settings.

  7. #7
    Community Leader NeonKnight's Avatar
    Join Date
    Aug 2007
    Location
    Surrey, Canada, EH!
    Posts
    5,025

    Default

    Would you be willing to email me the FCW map? I may be able to help. Maybe. No guarantees
    Daniel the Neon Knight: Campaign Cartographer User

    Never use a big word when a diminutive one will suffice!

    Any questions on CC3? Post them with CC3 in the Subject Line!
    MY 'FAMOUS' CC3 MAPS: Thunderspire; Pyramid of Shadows; King of the Trollhaunt Warrens; Demon Queen's Enclave

  8. #8

    Default

    I have done all this and re-scaled to a much bigger map. Unfortunately it is now much bigger than the original template. I am now very restricted in what i can do on my map.

    Can i now re-scale te template?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •