Results 1 to 9 of 9

Thread: Khardessa Orbital Lift Station

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Guild Expert Greason Wolfe's Avatar
    Join Date
    Dec 2008
    Location
    Tigard (and Florence) Oregon
    Posts
    1,745

    Wip Khardessa Orbital Lift Station

    In needing a break from the Haevenstadt Harbor Project, I decided to spend a bit of time working on another story setting, and though it is geared towards Science Fiction, it is still a town/city, so I figured I would post it here instead of in the Sci-Fi Forum. It's a story I've been working on in bits and pieces for a while now, and one of the problems I had been facing was the actual setting in which most of the scenes take place. I also thought it might be a good situation to experiment with adding in buildings through Terragen since they are likely to be enclosed structures with a grid-work of "tubes" connecting them. There would still be some open area, but it would be used mostly for the development of vegetation and, perhaps, a market place, of sorts, for the "less privledged."

    From the onset, I knew that the planet was very Mars-like in many ways as well as being marginally habitable. I knew, as well, that it was part of a relatively small star system. With that in mind, I used EP Eridani as a basic stellar model and extrapolated the following information based on the "known" information as listed in the Internet Stellar Database (ISDB);

    Stellar Statistics

    Spectral Class : K2V
    Stellar Mass : 0.747 Sol
    Stellar Radius : 0.915 Sol (635925 Km)
    Stellar Luminosity : 0.360 Sol
    Abundance of Heavy Elements : 98% (*/- 20%)
    Surface Temperature : 4543 Kelvin
    Habitable Zone : 0.6 AU

    Then I hopped over to WinstarGen (a handy little utility for generating planets around stars that gives more detailed results than AstroSynthesis) and started cycling through planetary systems until I found something marginally useful.

    Planetary Statistics

    Radius : 4248 Km
    Mass : 0.29 Earths
    Density : 0.98 Earths
    Gravity : 0.65g
    Atmospheric Pressure : 0.336 Atm
    Albedo : 0.66
    Orbital Distance : 94816418 Km
    Base Surface Temperature : 263K (-10C / 14F)
    Greenhouse Gas Adjustment :
    Final Surface Temperature : 275K (2C / 36F)
    Local Day : 72 hours
    Length of Year : 184 Standard Days (61 local days)

    In the two hundred years since it has been colonized, greenhouse gasses have been slowly introduced into the atmosphere, bringing down the overall albedo to its current level as well as thickening the atmosphere to a more tolerable level. It is still somewhat thin, however, and survival without aid is dependent upon keeping physical activity levels to a minimum.

    An important note here; The surface temperatures listed are those as measured at the equator. Moving north or south towards the poles results, obviously, in a temperature reduction that can become rather extreme (as low as -142F). As a consequence, most of the surface is covered in ice. Near the equator, however, there is a narrow band of water and some usable land. Were it not for the abundance of medium weight ores, the planet would likely have been ignored for something better around another star. As it is, this "fringe" world is little more than an "out-lying village" in terms of the expansion of humanity.

    The colonists have, within the last few decades, started to introduce vegetation as a means of increasing the oxygen content of the atmosphere. It is a long range goal at this point as is maintaining the delicate balance of atmospheric pressure to albedo. Any major shift in one or the other would result in a global ice age that would likely render the planet completely inhospitable.

    As of this writing, I've started with a basic landmass located near the equator. It is the site of the Orbital Lift Station (quite similar in theory to a Space Elevator) which is located atop the plateau that can be seen near the middle of the image below. Off to the left, there is another low rise that will likely become the "Flight Control Center" for shipments coming from other locations around the planet's surface, most of which will also "land" on the main plateau. I've a bit of work to do with the "coastal" portions, but given the fact that this landmass covers an area of roughly 16 square kilometers, detailing the coastline is going to be a low priority thing. In this first render, my primary goal has been to get the coloring worked out as far as the land and water surfaces go as well as the atmospheric effects. I've included a bit of the vegetation, but this is mostly to get an idea how it is going to look under a dimmer sun and through an atmosphere that isn't as blue as our own. When time permits, I will pull up a couple more, less intensive renders, to give a better idea of how the "island" looks from different points of view.

    Comments? Suggestions?

    GW

    And now it's off to look at this month's Challenge Entries . . . Wooohoooo!
    GW

    One's worth is not measured by stature, alone. By heart and honor is One's true value weighed.

    Current Non-challenge WIP : Beyond Sosnasib
    Current Lite Challenge WIP : None
    Current Main Challenge WIP : None
    Completed Maps : Various Challenges

  2. #2
    Community Leader Facebook Connected Steel General's Avatar
    Join Date
    Jun 2008
    Location
    Ft. Wayne, IN
    Posts
    9,530

    Default

    I like the color scheme... looking forward to seeing more.
    My Finished Maps | My Challenge Maps | Still poking around occasionally...

    Unless otherwise stated by me in the post, all work is licensed under a Creative Commons Attribution-Noncommercial 3.0 United States License.



  3. #3
    Guild Member Nytmare's Avatar
    Join Date
    Feb 2009
    Location
    Pittsburgh, PA, USA, Earth
    Posts
    59

    Post

    What software did you use to generate that, Terragen?

    [EDIT] Duh, you said it right there in the first paragraph... The newer versions are able to render structures of some kind?

  4. #4
    Guild Expert Greason Wolfe's Avatar
    Join Date
    Dec 2008
    Location
    Tigard (and Florence) Oregon
    Posts
    1,745

    Post

    Quote Originally Posted by Nytmare View Post
    What software did you use to generate that, Terragen?

    [EDIT] Duh, you said it right there in the first paragraph... The newer versions are able to render structures of some kind?
    I'm not sure about TG2Technology. I use 0.9.43 and will have to manually build up the structures which, at this point, is proving difficult as the Combine feature is not working they way it suggests. But the experimentation is not over yet.

    GW
    GW

    One's worth is not measured by stature, alone. By heart and honor is One's true value weighed.

    Current Non-challenge WIP : Beyond Sosnasib
    Current Lite Challenge WIP : None
    Current Main Challenge WIP : None
    Completed Maps : Various Challenges

  5. #5
    Guild Expert Greason Wolfe's Avatar
    Join Date
    Dec 2008
    Location
    Tigard (and Florence) Oregon
    Posts
    1,745

    Wip

    Update

    Did a little color tweaking over the weekend as well as a little "coast-line" work to smooth things out a bit and give the land more of a "excavated" appearance. The first image below shows the result of that work. One of the early problems was separating land from atmosphere as far as coloring goes, and I managed to accomplish this by shifting to a strata effect for land coloring while adjusting the sun's color to match something typical for a spectral class K star.

    From there, I moved on to the process of adding structures. This is, at least in Terragen, a painstaking process that eats up a lot of time as each building has to be added in on an individual basis and built as a separate elevation file, keeping in mind the height constraints set by the primary elevation file. In addition to this, there is a fair amount of editing to do with the base elevation file to smooth out the foundations for each building. My thought is to lay out the buildings first (along with a coloring mask) and, once I'm satisfied with them, start laying out the vegetation masks for the cultivated areas. As a means of giving the impression that the area around the Lift Station is evolving, I'm also going to include a random distribution of vegetation using TG's internal Fractal Noise, Coverage, Altitude and Slope features.

    From there, it will be on to the roads and/or Transportation Tubes/Bridges. I don't see much of a problem with these with the exception of the Transportation Tubes/Bridges where they might cross over water, or where they might be above ground level. TG (at least version 0.9.43) doesn't have the ability to render such things in a single shot, so it might call for a double render and some post render editing in PSP or Gimp.

    One of the things I have been debating as a little "spice" to the end result is the possibility of adding a little stellar debris to the sky in the sense that with a thinner atmosphere, it might be possible to see some stars in the sky even during the day. I'm not 100 percent set on this idea yet and will have to wait and see how the rest of the rendering process turns out before I finalize that idea. If I do go for it though, I'll likely follow the suggestions in one of Joe's tutorials about using FTPro to generate star fields.

    As an added bonus, the second image below gives a very basic idea of what the structures are going to look like once I've nailed them down as far as elevation goes. The current sample displays somewhat exaggerated building heights, but they will be tweaked into proportion once I've gotten more proficient with the process of adding them in. At some point, as well, I'll try to decide on an architectual style for the buildings to give them more of a cultural feel.

    GW
    GW

    One's worth is not measured by stature, alone. By heart and honor is One's true value weighed.

    Current Non-challenge WIP : Beyond Sosnasib
    Current Lite Challenge WIP : None
    Current Main Challenge WIP : None
    Completed Maps : Various Challenges

  6. #6
    Guild Member Nytmare's Avatar
    Join Date
    Feb 2009
    Location
    Pittsburgh, PA, USA, Earth
    Posts
    59

    Post

    I forget the process, but you used to be able to import your own elevation files for terrain. Can you still do stuff like that for other structures?

    As soon as I put these new hard drives in this machine I'm going to download the new version and start playing with it again.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •