Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: [WIP] Cora

  1. #1

    Wip [WIP] Cora

    Okay I'm having some issues with my map, I've created it in photoshop using Jeremy Elford's tutorial, which I have to say is amazing. The problem I am having as you can see in the pictures is the mountains are coming out a bit too bumpy, I've tried rendering the mountain texturing at a lower resolution to attempt to give it less variance, but that didn't seem to work quite as much as I hoped it would. It also ends up lightening the whole map greatly. I'm not sure how he got his 'mountain' layer to blend in as much, along with some of the other information that was unfortunately left out on settings he used
    Here's before and after mountains

    The other question I have is, what are some good RGB colors for texturing such as how he got the darker faded look in the end with his map, mine seem to be a bit too vibrant and I've had to put an all black fade onto it to tone it down a little. It works, but it'd be nice to have a bit more brown in all the colors to begin with.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Cora Map w mountains.jpg 
Views:	96 
Size:	1.62 MB 
ID:	12909   Click image for larger version. 

Name:	Cora Map graineds.jpg 
Views:	83 
Size:	1.59 MB 
ID:	12910  
    Last edited by Sleaker; 05-04-2009 at 08:04 PM. Reason: changed to a WIP post

  2. #2
    Community Leader Gracious Donor ravells's Avatar
    Join Date
    Jun 2006
    Location
    London, UK
    Posts
    10,930

    Default

    Jezelf's tutorials are amazing. Thanks for reminding me, I've put the link in the quickstart sticky.

    The clouds filter renders at a fixed size regardless of the size of your map, so if you have a small document you will have relatively 'big' mountains and vice versa. The only way to adjust this is to render the clouds in another bigger or smaller document and then upscale or downscale it when you paste it into your original document.

    If you want the mountains less 'bumpy' select your heightmap in the channels tab and use a brightness and contrast adjustment to clip away the extreme blacks and whites which translate into peaks and troughs when you render the lighting effects or when you render the lighting effects push the slider at the bottom more towards flat or lower the intensity of the lighting.

  3. #3
    Community Leader Facebook Connected Ascension's Avatar
    Join Date
    Jun 2008
    Location
    St. Charles, Missouri, United States
    Posts
    8,298

    Post

    My niece has Communion today so I'll be gone most of the day but when I get back I'll give his tut a look-through and give ya some pointers by this evening. In my experience, no matter the size of the clouds, the Lighting Effects filter seems to render "mountains" at one size fits all. Anyways, I'll check back this evening.
    If the radiance of a thousand suns was to burst at once into the sky, that would be like the splendor of the Mighty One...I am become Death, the Shatterer of worlds.
    -J. Robert Oppenheimer (father of the atom bomb) alluding to The Bhagavad Gita (Chapter 11, Verse 32)


    My Maps ~ My Brushes ~ My Tutorials ~ My Challenge Maps

  4. #4
    Community Leader Facebook Connected Ascension's Avatar
    Join Date
    Jun 2008
    Location
    St. Charles, Missouri, United States
    Posts
    8,298

    Post

    First off, these look like pretty realistic (but blurry) hills. Second, if you want to get rid of some of them (to have more flat spots) just use a soft-tip eraser, turn down the opacity of the eraser to under 20% and erase out the areas that you want to be flatter...note that this will only work if the hills are on their own layer. If everything has been flattened/merged together then you will have to use the eyedropper tool to select a good green color and then airbrush over the tops of the hills you want to be flatter. You could also go back to the gray-scale layer and airbrush over some areas before running the lighting effects filter.

    As for good colors, well...that's all in the eye of the beholder. RobA has a post here:

    http://www.cartographersguild.com/sh...dient+Goodness

    which links to a site that has tons of cool gradients that might help inspire you.
    If the radiance of a thousand suns was to burst at once into the sky, that would be like the splendor of the Mighty One...I am become Death, the Shatterer of worlds.
    -J. Robert Oppenheimer (father of the atom bomb) alluding to The Bhagavad Gita (Chapter 11, Verse 32)


    My Maps ~ My Brushes ~ My Tutorials ~ My Challenge Maps

  5. #5

    Post

    Hey thanks Ascension. been playing around with some other color schemes and such and came up with this one:
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Cora Ancient.jpg 
Views:	70 
Size:	2.49 MB 
ID:	12936  

  6. #6
    Community Leader Facebook Connected Ascension's Avatar
    Join Date
    Jun 2008
    Location
    St. Charles, Missouri, United States
    Posts
    8,298

    Post

    Yep, that's a great lookin color scheme. Lots of little gradations there that really work well together.
    If the radiance of a thousand suns was to burst at once into the sky, that would be like the splendor of the Mighty One...I am become Death, the Shatterer of worlds.
    -J. Robert Oppenheimer (father of the atom bomb) alluding to The Bhagavad Gita (Chapter 11, Verse 32)


    My Maps ~ My Brushes ~ My Tutorials ~ My Challenge Maps

  7. #7

    Post

    was playing around with brushes like Jeremy's tutorial suggests for doing the mountains, but after looking up a bunch of the old maps of Middle Earth I decided to hand draw in the mountains myself. This is the effect that I'm getting and I'm really starting to like it.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Cora Ancient.jpg 
Views:	73 
Size:	331.8 KB 
ID:	12944  
    Last edited by Sleaker; 05-03-2009 at 03:25 AM. Reason: didn't show up originally

  8. #8

    Wip

    Played around with the size of the mountains and decided that the map was turning out a bit too dark, I want more of that orange parchment color so I changed a few things around. So far the mountains seem to be coming in pretty good, in the end I may put on another blended layer for more shadow on the mountains, right now they are just one color though
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Cora Ancient.jpg 
Views:	70 
Size:	632.9 KB 
ID:	12969  

  9. #9
    Guild Journeyer Bohunk's Avatar
    Join Date
    Feb 2007
    Location
    Cleveland
    Posts
    231

    Post

    I'm liking the style Sleaker. I liked the darker version better though.
    Regards,

    Jim

    My Maps

  10. #10

    Post

    After much headache with monitor calibration and figuring out which of my monitors was setup properly, I've adjusted the main map colors slightly kind of a reddish brown which seemed to be the most popular. After that I started adding in a bit of grey shading on the mountain line as a go along to give it a more pencil feel.
    This is how the mountains should look when it's finished, at actual size.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Cora Ancient.jpg 
Views:	72 
Size:	172.7 KB 
ID:	13129  

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •