Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: WIP: The Harborside Ambush

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default WIP: The Harborside Ambush

    So, just recently started learning to use GIMP to make maps now that Dundjinni seems to be effectively dead software. My first attempt is the following map that is supposed to represent a raised boardwalk alongside the water of a harbor. A portion of the boardwalk has been collapsed and dropped into the water below. Meanwhile several thugs are camped on the rooftops of nearby buildings waiting to shoot at my PCs with crossbows while a few more are on the boardwalk itself, ready to engage the PCs in melee if they avoid getting dropped into the water. Finally, the water itself is going to be dangerous as it'll have been seeded with chum, attracting a shark that'll not be too pleased with having PCs dropped on it's head.

    So naturally, the map sucks and fails to convey all of this. Any input would be greatly appreciated.
    Practicing.jpg

  2. #2
    Guild Master Facebook Connected jtougas's Avatar
    Join Date
    Sep 2010
    Location
    Wales Massachusetts
    Posts
    2,813
    Blog Entries
    27

    Default

    Looks like a map to me. If it fits your encounter and gives all the information you need to run the encounter than it's fine. Good job.
    I am the breath of Dragons...The Song of Mountains...The Stories of Rivers....The Heart of Cities.... I am A Cartographer....

    Finished Maps
    Kingdom Of Shendenflar Campaign Setting (WIP)

    Everything I post is free for use and redistribution under the Creative Commons Attribution-Noncommercial-Share Alike 3.0 licence, except where noted otherwise in the thread.

  3. #3
    Guild Artisan geamon's Avatar
    Join Date
    May 2009
    Location
    Bronx, NY
    Posts
    616

    Default

    Taking a cursory look I can see somethings you can learn or ameliorate. First is to develop a texture library or the ability to create your own textures seeing as you are using the default GIMP ones (Here's a good source to start from). You also may wanna work with muted or less saturated tones for I find they yield a better overall aesthetic. Second thing is to learn then function of layers and layer masks as these allow for powerful editing (Here's jfrazierjr Tutorial on layer masks). Also you should learn to set a B&W outline as a start point and use that as a base layer to build from, I find the more I have outlined the easier it is to develop a map. When using the Pattern -> Grid filter make sure the offset is set to 0 for both x and y axis so that your grid is centered. The scales that are most common for encounter styled maps is 50 px per square or 100 px per square choose what you prefer and work from there. Take advantage of the internal grid in GIMP and it's snap capabilities to ensure clean lines and ease of manipulation. I leave you with this and wish you goood luck and welcome to the CG.
    Cheers, Julien

    Battlemaps, Town Maps, Tutorials.
    All my maps and content are posted and published under this Creative Commons License. Click Here for information on licensing.

  4. #4

    Default

    Thanks for the advice and links geamon. I'll definitely be working on improving my skill. The biggest thing that I'm having to overcome is that I have previously done a lot of my battlemapping with various softwares that do a lot of the work for you (Dundjinni and AutoREALM). So I'm having to learn to get used to the additional steps I have to do in order to achieve the same effects that were often done with a single action.

  5. #5

    Default

    so I have to admit I'm going to troll for a bit more help. I've been trying to mess around a bit more with some of the various tutorials around here, but I'm not sure I'm seeing how I can use layers to get better 'depth' along the line between the walkway and the water. Anyone have some tips or pointers in the right direction?

  6. #6
    Guild Artisan geamon's Avatar
    Join Date
    May 2009
    Location
    Bronx, NY
    Posts
    616

    Default

    Bevels and drop shadows will do the trick.
    Cheers, Julien

    Battlemaps, Town Maps, Tutorials.
    All my maps and content are posted and published under this Creative Commons License. Click Here for information on licensing.

  7. #7
    Guild Master Facebook Connected jtougas's Avatar
    Join Date
    Sep 2010
    Location
    Wales Massachusetts
    Posts
    2,813
    Blog Entries
    27

    Info

    Here is a quick example of what Geamon was talking about. I took your image added a layer over it and used an airbrush with the following settings to make shadows.
    fuzzy circle 19px
    scale 5.00
    opacity 100.00
    mode normal
    I use black but a darker gray or a very dark blue would also work.
    Practicing.jpg
    I am the breath of Dragons...The Song of Mountains...The Stories of Rivers....The Heart of Cities.... I am A Cartographer....

    Finished Maps
    Kingdom Of Shendenflar Campaign Setting (WIP)

    Everything I post is free for use and redistribution under the Creative Commons Attribution-Noncommercial-Share Alike 3.0 licence, except where noted otherwise in the thread.

  8. #8

    Default

    Well I've started working on a 'new and improved' version of my map that will hopefully start to make things look a little more polished. Below is where I'm at now. I've tried to utilize some of the tricks I've learned regarding using layers and layer masks to make editting much easier as well as giving me 'cheater' ways of accomplishing shadows that are approximately the right shape without having to hand draw them. I'm needing to figure out a better way of doing the dirt atm. Out of curiosity, I've found several repositories of 'seamless textures' out there. I'm having some difficulties finding out how I'm supposed to use them in GIMP. Every time I try to search for information online, I keep running into tutorials about MAKING them rather than USING them lol.

    Harborside Ambush fancy WIP.bmp

  9. #9
    Guild Master Facebook Connected jtougas's Avatar
    Join Date
    Sep 2010
    Location
    Wales Massachusetts
    Posts
    2,813
    Blog Entries
    27

    Default

    Textures are very easy to use in GIMP. Once you find a texture (or textures) that you like you can make patterns out of them that you can use to fill areas. Here is a quick step by step:

    1. Find a texture that you like. (just a note on this step, GIMP can't "scale" patterns like Photoshop so you have to change the size of the original image to fit what you need. It helps to start out with a large image that you can make smaller)
    2. Once you find the image and scale it to your desired size save it as a .pat file.
    3. Restart GIMP and your new pattern will show up in your pattern dialog box.
    4. Now you can use the bucket tool to apply your new pattern.

    I hope this helps. Your on your way to a great looking map. I'm looking forward to watching this progress
    I am the breath of Dragons...The Song of Mountains...The Stories of Rivers....The Heart of Cities.... I am A Cartographer....

    Finished Maps
    Kingdom Of Shendenflar Campaign Setting (WIP)

    Everything I post is free for use and redistribution under the Creative Commons Attribution-Noncommercial-Share Alike 3.0 licence, except where noted otherwise in the thread.

  10. #10

    Default

    That worked perfectly. Here's what I've got now at this point, complete with 'tokens' to represent PCs and enemies. There's still some areas where I don't feel like it's quite looking right. For example, I'm still not all that happy with how the dock looks, but I'm having a difficult time finding any sort of fill (at the moment) that can duplicate the piecemeal of dock planking. In addition, the road isn't really looking the way I'd want it to at best, but again, that's something I can play with and figure out later. My main goal is learning how to do a lot of these tricks now so that I can begin to use GIMP to churn out good looking encounter maps without 'too' heavy of a time investment. Thus practicing lol

    Fancy Ambush 2.JPG

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •