Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Pre-Cataclysmic World (Pangea-type map)

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Guild Apprentice Veluux's Avatar
    Join Date
    Aug 2013
    Location
    Colorado, USA
    Posts
    40

    Wip Pre-Cataclysmic World (Pangea-type map)

    Starting from scratch on a pre-global flood type of world. Did a lot more research on hydrology and tectonics and how a biblical-type flood would effect things. With a giant outer atmosphere of water raining down (effecting the balance of the earth's magnetic field), and giant fissures opening up with water coming up from below the earth's crust - tectonic plate movement could have been massively accelerated. So I'm going with a pangea-styled map.

    This first image has the overlay I used to define the outer borders of the mainland.
    Pangea-v1b.jpg

    Here is the progress of the map so far - with a textured and stylized look to it.
    Pangea-v1.jpg

    I'm planning on making Greenland into the mythical location of Eden. That particular plate will sit higher than the others (with a massive body of water below it - which is what causes it to be somewhat raised compared to the other modern-day continents). In the center of Eden will be a set of fantastical-scale springs that feed four major rivers (I have yet to define them - but they will likely follow somewhere along the modern-day continent borders; since that would be the natural low-lying points).

    Since the earth at that time would have a greatly amplified "green-house" effect - most of the world will be watered by a morning fog (when the water condenses at lower altitudes) and the modern-day rain and wind we're used to will be extremely rare, if non-existent. This will greatly effect the way that geology forms (and erodes), opening up the door for some interesting fantasy landscapes.

    Anyways, that's basically the gist of it. Any thoughts on the idea and what other factors I should consider?

  2. #2
    Guild Adept Viking's Avatar
    Join Date
    May 2013
    Location
    Canada
    Posts
    436

    Default

    Interesting idea! I would be careful with the textures you use. The current one looks like dried up and cracking mud which makes the landmass feel pretty small. I would try to sample textures from real places instead. The inside of the continent is more likely to be dry and the outside bits wetter I would guess. I would start with tectonic boundaries and plate directions to determine mountain ranges and such from that to determine your drainage basins. Since you are going the mythological route I guess you could do whatever you want geologically.
    ------------------------------------------------------------------------------------------------------
    Finished Maps: Skenth - Prints Available!
    Works in Progress: Arinthia - region of Skenth

    Need something commissioned? Send me a message!

  3. #3
    Guild Apprentice Veluux's Avatar
    Join Date
    Aug 2013
    Location
    Colorado, USA
    Posts
    40

    Default

    Quote Originally Posted by Viking View Post
    Interesting idea! I would be careful with the textures you use. The current one looks like dried up and cracking mud which makes the landmass feel pretty small. I would try to sample textures from real places instead. The inside of the continent is more likely to be dry and the outside bits wetter I would guess. I would start with tectonic boundaries and plate directions to determine mountain ranges and such from that to determine your drainage basins. Since you are going the mythological route I guess you could do whatever you want geologically.
    Thanks. Yeah, that texture is just a temporary one. Just wanted to make the map look somewhat presentable for how bare it currently is. I'm torn between doing a straight overworld shot - or a 3/4 shot. I want it to have an artistic feel to it - while also being fairly accurate for geographic terrain. I actually REALLY like the style you used on your world map for Skenth - its a good marriage of artistic and accurate.

  4. #4
    Guild Member Facebook Connected madbird-valiant's Avatar
    Join Date
    Nov 2013
    Location
    South Australia
    Posts
    88

    Default

    I'm not sure how valid sticking the world map together is as per what Pangaea looked like, but it makes for an interesting map shape anyway Great work, look forward to seeing your progress with it.

  5. #5
    Guild Apprentice Veluux's Avatar
    Join Date
    Aug 2013
    Location
    Colorado, USA
    Posts
    40

    Wip Update!

    So I finally fleshed out a lot of the terrain and major climate areas. Still need to get the river systems laid out and added in. Also going to rework the visual style so it doesn't look so blotchy. I'm totally not happy with this version yet at all - from a graphical standpoint anyways. But it's an important step as far as terrain and world layout. Also getting the major climate zones mapped was important. Definitely a lot of adjustments going forward... but here it is so far:

    Pangeav4.jpg

    Just wanted to note that it is a very reduced size (my internet is crappy today, and the graphical details aren't super important at this stage anyways). I still need to clip my mountain areas and feather them out to get rid of the harsh lines - so try to ignore that.

  6. #6
    Guild Apprentice Veluux's Avatar
    Join Date
    Aug 2013
    Location
    Colorado, USA
    Posts
    40

    Default More Big Updates!!

    Made of TON of graphical improvements to the map. Still need to map in the rivers - that's the largest major component missing. After that it will be a lot of labeling, and some cosmetic pieces of art (compass, borderart, etc). It's kind of my own twist on Ascension's Atlas style.

    FYI this is a MASSIVELY reduced res version (the PDB file is nearly 4GBs at this point...):
    Pangea15percentreduce.jpg

    Would love to hear what people think of the aesthetics so far!

  7. #7
    Guild Apprentice Veluux's Avatar
    Join Date
    Aug 2013
    Location
    Colorado, USA
    Posts
    40

    Wip Updates again.

    Finished all the major regional labeling. Still need to do rivers and cities. Then the finishing touches/cosmetics.

    Pangea25percentreduce.jpg

  8. #8
    Guild Apprentice Veluux's Avatar
    Join Date
    Aug 2013
    Location
    Colorado, USA
    Posts
    40

    Wip One Step Closer

    Here's yet another update. I've been moving smoothly on this one. Added in a lot of smaller labeling (capitals, cities, ruins, etc). Also roughly sketched in the river network. Since CG was down earlier I didn't get to post it right away. Looking at it now as I upload this image I already see a few minor tweaks I want to make with the water. Still want to post it up anyways in case somebody see's something I don't see.

    Just a note, the green region in the center of the map labeled "Godspring" is a piece of fantasy geography - it's a divinely-fed spring that feeds out four rivers into the surrounding landscape. It sits much higher than the other regions - which is why the rivers appear to cut through the mountains (then pour over waterfalls) to the lower terrain below.

    But any water-network outside of that should be standard real-world hydrology. Would love some input since I'm getting closer and closer to finishing the map. Everything is still highly-editable up to this point, so don't be shy to make a suggestion because you feel I've already put WAY too much work into it already (which I have - haha).

    Thanks!

    Pangea24percentreduce.jpg

    Also, before I forget. Does anyone know of any free pre-made map symbol sets. I've looked through the reference material area of the forums and most things are so dated the don't even link properly anymore. I'm mostly looking for alternative symbols for cities, landmarks, or other nifty things that I don't even know I need yet. Any input is very welcomed!

  9. #9
    Guild Apprentice Veluux's Avatar
    Join Date
    Aug 2013
    Location
    Colorado, USA
    Posts
    40

    Wip Getting closer.

    Put in the rivers, and made a few minor edits.

    Pangea24percentreduce.jpg

    All I've really got left is creating the border-art and getting the map legend, compass, and other map-reading essentials finalized. Mostly just finishing aesthetics and balancing some colors and making minor label adjustments.

  10. #10
    Guild Expert Guild Supporter Lingon's Avatar
    Join Date
    Dec 2012
    Location
    Sweden
    Posts
    1,212

    Default

    I like the textures you are using!

    I'd suggest tweaking the colors a bit though; right now, it's super-heavy in contrast everywhere, which is negative for the readability. Using contrast focused in small areas make it easy for the eye to find the important things. Many labels curve more than they have to, too, and raster programs don't handle extremely curved text very well, making the letters distorted in many places. If you want the mountain names to follow the ridges, one way is to use a smaller font size.

    Those where my thoughts at least

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •