Results 1 to 7 of 7

Thread: [Award Winner] How to Apply Realistic Elevation from Real Maps to Yours.

  1. #1
    Guild Journeyer
    Join Date
    Apr 2010
    Location
    Midwest, USA
    Posts
    157

    Tutorial [Award Winner] How to Apply Realistic Elevation from Real Maps to Yours.

    I realize this is much less polished than most tutorials here. But my method was requested, and i haven't seen anything similar in the tutorial section, so i present it for what's it's worth.


    The following works for photoshop, but the GIMP can probably do something very similar. Intermediate skill with your app of choice is required


    While it is not necessary, you may find it useful to use my realistic elevation brush set to fill in some of the small details when it's not efficient to use the method in this tutorial.

    1 ) I'm assuming you've already figured out your coastline.


    2 ) I set things up to do the elevation one continent at a time, since it was easier that way. Make a layer from one continent: the land fully opaque and the sea fully transparent. Make it white if black is your max elevation color, or black if white is your max elevation color. You may want to do this in a separate document, if your map high res enough to be slow. Most of the layer's you'll make will be flattened when you are done.


    3) On another layer sketch in where you want your mountains, continental divides, or whatever you have as a guide. The brown in my example is where i want my mountains.

    step 2.jpg


    4 ) Open some elevation maps like these. You just want greyscale without any shadows. For something more exotic use elevation maps of the moon, mars or other celestial bodies.


    5 ) Look for parts on the real elevation map that more or less match what you want on your map. If your continent is large or complex you will need to look for one piece at a time. The Rocky mountains here gradually sloping down across the great plains is basically what i want for my continents, since this one is pretty simple (as examples should be). Select what you want with the lasso, feather your selection and then copy and paste it in as a new layer. I'm using white as down, so i need to invert this bit of the rockies.


    6 ) Move your cut-out piece of elevation over your shoreline layer from step 2. Then "Create a Clipping Mask" with the cut out bit of elevation. In Photoshop you can do that by OPTION clicking between the two layers, or from the contextual menu. If you do it right, it will look the following. The clipping mask will only show the part of your elevation layer that is over an opaque part of the coastline layer, thus anything over the ocean isn't shown.

    step 4.jpg


    7 ) Resize, Flip, Rotate etc. the elevation layer until it goes where you want it to. It won't be a perfect fit, but we'll refine that later. Turn on your guide layer when you need to remember your original idea, turn it off, when it gets in your way.


    8 ) Chances are the bit of elevation you copied doesn't have everything you want. That's fine. Go grab another piece of elevation as per step 5. Paste it into your document and position it above the previous bit of elevation-- don't worry if it overlaps. You'll want to "create a clipping mask again" with this one and any additional layers to your base coastline. All should be clipped to your base coastline layer.


    9 ) OK, now the tricky part is getting these disparate bits of elevation to line up, right? Don't worry, it's not tricky my way. If down is white, you'll set the blending mode of all your elevation layers to "Multiply". If down is black use the "Screen" blending mode. What this does is add both elevations together, assuming that some of the layers of copied elevation overlap-- which they should. The only hard edges you see should be at your coastline. If you are more familiar with your app, you can probably think of variations on this method to achieve different effects, but i won't go in to that.

    step 5.jpg


    10 ) I find it hard to gauge what going on just staring at greyscale elevation. So i made a gradient map with a series of colors like you'll find on a topographical map. This gradient map layer sits above all the other layers. While you are painting with black or white on one of the elevation layers, the gradient map instantly converts the appearance to nice topographical color.

    step 6.jpg


    11 ) Now it's time to refine the elevation. You can paint with fuzzy, semi-transparent white and black brushes on any of the elevation layers to emphasize or de-emphasize any feature. For wide-spread, gentle changes, use a radial gradient tool, set to low opacity.


    12 ) When you are happy with the appearance, merge all your layers together (but not the gradient map layer, or your guide layer) and your are done.

  2. #2
    Guild Journeyer hohum's Avatar
    Join Date
    May 2009
    Location
    Phoenix, AZ
    Posts
    166
    Blog Entries
    3

    Default

    Nice technique, I took the liberty of making a PDF of it.
    Elevation Tutorial.pdf

    Although I did not follow it exactly here is what I came up with using your brushes and Wilbur.
    wilbured dem.png

    I think my main deviation was leaving the brush layers as normal and then I used the color picker to get a shade of gray to fill the land underneath all of the elevations. Then I fixed up the peak areas in wilbur with mounding [EDIT - I remembered I did not use mound in wilbur, I went back into GIMP and used Angular Fill on Blend tool for the peaks] and incise flow. Then erosion cycle on the whole land mass. Oh yeah and I did the original DEM in GIMP. I dont know about the layer style but you can run a palette map to see the elevations better.

    And have some rep for the brushes and an interesting technique.
    Last edited by hohum; 05-13-2010 at 06:38 PM. Reason: Didn't use mound in Wilbur

  3. #3
    Guild Apprentice Meridok's Avatar
    Join Date
    Dec 2009
    Location
    Nova Scotia, Canada
    Posts
    29

    Default

    Interesting technique and what a great resource for real elevation in greyscale! Thanks for this. I don't have time to play with it now, but it might hold at least some hints on making my mountains. *g*

  4. #4
    Secret Super-User StillCypher's Avatar
    Join Date
    Feb 2008
    Location
    Utah
    Posts
    245

    Default

    This looks like it will be a great help. Any chance we could get the gradient, too?
    -÷-÷-÷-÷-÷-÷
    “It is not down in any map; true places never are.” (Herman Melville)

    “A good map is both a useful tool and a magic carpet to far away places." (unknown)

  5. #5
    Guild Journeyer
    Join Date
    Apr 2010
    Location
    Midwest, USA
    Posts
    157

    Default

    OK, this gradient definition will work with Photoshop. I don't know about the GIMP.
    Attached Files Attached Files

  6. #6
    Community Leader Guild Sponsor Gidde's Avatar
    Join Date
    May 2009
    Location
    Michigan, USA
    Posts
    3,673

    Default

    I just popped that gradient into my gimp gradient folder (because GIMP can handle photoshop brushes, thought it was worth a try) and I don't see it. What's its name (I assume it was just Elevation)?

    Edit: I just now actually had time to read through this, and it's great. I think this actually gives me a solution to a problem I was having with one of my maps. Thanks!
    Last edited by Gidde; 06-12-2010 at 12:04 PM.

  7. #7
    Guild Journeyer
    Join Date
    Apr 2010
    Location
    Midwest, USA
    Posts
    157

    Default

    Quote Originally Posted by Gidde View Post
    I just popped that gradient into my gimp gradient folder (because GIMP can handle photoshop brushes, thought it was worth a try) and I don't see it. What's its name (I assume it was just Elevation)?
    Yup, "Elevation". You'll need to unzip the file before either app can use it. Don't know if that will help GIMP or not.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •