Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Follow-Along with RobA's Artistic Regional RPG Map

  1. #1

    Default Follow-Along with RobA's Artistic Regional RPG Map

    Hello!

    I love RPG maps. I hate that I can't make them. I really hate that I can't even seem to follow any of the tutorials to get the desired result.

    I can draw pretty well with pencil and paper, but have no skill doing so on a computer.

    I'm going to give RobA's tutorial a shot once again. This will be my third time. I always fail somewhere along the line and the map looks nothing like his example pics.

    I will be using my fingertip on my laptop's touch pad...
    Last edited by Sharpe; 10-18-2010 at 03:47 AM.

  2. #2

    Default

    Quote Originally Posted by RobA View Post
    Post 3: Then Let's Begin (if I have an idea)

    <snip>

    Now create a new transparent layer (Layer->New Layer) and name it “Land”, pick a big, solid brush in black and trace out the contours using the Pencil Tool, then fill the area you want land in black, and everything else white.
    GIMP TIP! – You can drag a colour from the palette or the color selector to an image and it will fill the current selection with that colour.
    I've decided to doodle over Dragon Warrior 1's overworld map.
    Attached Images Attached Images

  3. #3

    Default

    Now invert the layer (Color->Invert) and blur the image (Filters->Bur->Gaussian Blur) The amount of blur will determine how random the final coast will be. The larger the blur, the more random the coastline will be (in the blurry area). If you have a well defined coast already (like here) use a smaller blur (50px). If you have a poorly defined coast (as is the case when using a random coast technique) make it a large blur.
    I blurred my image 25px.

    I went back and blurred a few areas more by hand on the main coast to get more randomness there but keeping the detail in the island ring. Note the histogram. What you want is a nice level image, with dark and light more evenly spread out, as opposed to a U shape.
    Well, I'm looking at mine and it's completely flat... No idea what the histogram is or why this is important. I guess I'll have to soldier onward...

    Okay, I clicked on one of the buttons to see if that helped, and I think it did. By default, mine histogram was set to Linear and I guess it needs to be on Logarithmic. Here's a screen shot: http://i852.photobucket.com/albums/a.../histogram.jpg

    So, it's 'U' shaped and the tut says you want it flat, but I don't know how to level it out...

    Well, I'll just have to continue with a 'U'-shaped histogram.

  4. #4

    Default

    Create new layer called “Land Noise” and fill it with clouds (Filter->Render->Clouds->Solid Noise) Set the detail to the maximum (15) and the X and Y size to the max (16.0). The larger the size, the more randomness your final coast will have. Give it a new random seed and jot down the number (I put it in the layer name afterwards as a reminder). And change the blend mode to Overlay.
    That did just about nothing. Turning the overlay layer on and off, I can see it does do a very, very tiny amount of difference to the coast, but nothing like the example.

    I wonder if a lot more blur would help this.

    Imma save and go back.

    EDIT: Here's a screenshot with blur at 100px: http://i852.photobucket.com/albums/a...histogram2.jpg

    Not sure if that histogram is better or worse.

    EDIT x2: Okay, that looks a lot more like Rob's example pic. Unfortunately, it looks a lot less like the Dragon Warrior map... :/

    EDIT x3: As of right now, I've settled with a blur of 65px. XD
    Last edited by Sharpe; 10-18-2010 at 05:02 AM.

  5. #5

    Default

    Create a new layer called “Land Clip”, filled with white above that, and set its blend mode to Lighten. You will have a white image. Now, with this layer selected, Open the levels dialog (Colors->Levels) and grab the white output slider, and drag it down. As this happens, the land will be revealed. Stop at a place you like, and click OK.
    The part I bolded and underlined, I'm not sure what it means "above that." This is the first sentence of post 4. I think it means above the Land Noise layer. That was the last thing created in post 3.

    I made the layer and set it to Lighten Only. Then, I took the slider and "stopped at a place I liked." Since I really have no idea what I'm doing here, I have nothing to base what I "like" off of. I just look at Rob's example and kinda put it in about the same place he did. It's all Greek to me.

    Now using the Magic Wand Tool, (making sure Sample Merged is Checked and the Threshold is 0) click anywhere in the dark area. This will define your coast. If you want to adjust it, just undo the selection (ctrl-Z) and change the levels of the “Land Clip” layer. I wand back and tightened the coast a bit.
    Okay, so the more white you have, the less coast you're going to have. I went back and added a lot more white. Screen shot: http://i852.photobucket.com/albums/a...RPS/coasts.jpg

    Now Invert the selection (Select->Invert), create a new black layer called “Land Mask” and fill the selection with white. Now save the selection to a Channel (Select->Save to Channel) and rename the channel to “Land Mask”. This will be used a fit bit later.
    Yikes. That was all scary. I don't even know what in the world any of that was.

    Here's a screen shot, which looks nothing like any of Rob's examples: http://i852.photobucket.com/albums/a...S/landmask.jpg

    I have a feeling this is only going to get farther away from Rob's examples from now on.

    But, maybe not. This is about as far as I made it the last two times I've tried over the last 9 months. Maybe the third time's the charm!

  6. #6

    Default

    Post 6: Create the sea. (in the beginning...)

    To make the ocean/water (and the base contour for the land as well) a two layer variant of the three layer sandwich will be used.
    Copy the “Land Mask” Layer, and rename it “Sea Shape”. Apply a Gaussian Blur (Filter->Blue->Gaussian Blur) large enough to eliminate the absolute black and whites of the image. In this case, I used the same size as the image (500px).
    I just don't know if I got this right at all. I don't think I even know what this means. I didn't have any absolute black in the image, and if both are "eliminated" that leaves nothing on my map...?

    So, Rob made his blur amount the same as his map, so I guess I will too.

    Okay. It's totally off. It's like, not even there. Rob's looks like this: http://www.cartographersguild.com/at...6&d=1194552925

    Mine looks like this: http://i852.photobucket.com/albums/a...S/seashape.jpg

    Looks like I'm done until I get someone to pull me out...

  7. #7

    Default

    Well, I'll keep going just to see what happens.

    Create a new layer and call it “Sea Noise” Fill this with Clouds (Filters->Render->Clouds->Solid Noise) set to a low size (3) and detail of 15, reseeding the random number. Set the layer blend mode to mode to Overlay, then merge it down with the “Sea Shape” layer by right clicking on the layer and selecting “Merge Down”.
    Got it. 'Sept it looks nothing like the example. At all.

    Duplicate this layer and rename it “Sea”. Add a layer mask by right clicking on the “Sea” layer, and selecting “Add Layer Mask”. When the dialog opens, select “Channel” (By default it should have the “Land Mask” channel shown and check “Invert”. Click Add.
    Okay. Need a right parenthesis after "shown."

    Screen shot: http://i852.photobucket.com/albums/a.../layermask.jpg

    The layer mask next to the layer thumbnail looks like Rob's. The layer thumbnail, of course, doesn't.

    Quote Originally Posted by RobA View Post
    Layer masks act like filters that let parts of the image “show though”. Areas where the mask is white will allow the layer to be visible. Areas where the mask is black will be transparent, and the various shades of grey will be varying degrees of transparency. Now right click on the “Sea” layer and select “Apply Layer Mask”. This will remove pieces of the layer based on what was showing through the layer mask. Here I have made all the other layers invisible to see the result:
    Attachment 1440
    Well, Rob's looks like what it supposed to. Mine looks like I spilled milk on the screen: http://i852.photobucket.com/albums/a...S/allwrong.jpg



    Also, check out the histogram….that is where we start next.
    And, I'm sure mine is all off, not that I even know what it does.

    It's actually completely blank. Is that better or worse than 'U' shaped?

    I'm done.

  8. #8

    Default

    ....Okay, I'm not done.

    I went back to where things started to go wrong.

    Now Invert the selection (Select->Invert), create a new BLACK layer called “Land Mask” and fill the selection with white. Now save the selection to a Channel (Select->Save to Channel) and rename the channel to “Land Mask”. This will be used a fit bit later.
    There's where things might have went haywire for me.

    Before, I created a transparent layer and filled the selection with white. This time around, I created a layer with a Layer Fill Type set to background color (which is black). Then, I filled the inverted selection (the landmasses) with white.

    Now it looks more like Rob's. Here's a screen shot: http://i852.photobucket.com/albums/a...URPS/mask2.jpg

    The only issue I see is that my coastline is completely razor straight and flat...

    But, I want to see how this goes so I'm not going to worry about that right now.

  9. #9

    Default

    To make the ocean/water (and the base contour for the land as well) a two layer variant of the three layer sandwich will be used.
    Copy the “Land Mask” Layer, and rename it “Sea Shape”. Apply a Gaussian Blur (Filter->Blue->Gaussian Blur) large enough to eliminate the absolute black and whites of the image. In this case, I used the same size as the image (500px).
    I still don't know what that means, but I can read the pictures just fine.

    I think (hope) this looks pretty close: http://i852.photobucket.com/albums/a...GURPS/blur.jpg

    Quote Originally Posted by RobA View Post
    Layer masks act like filters that let parts of the image “show though”. Areas where the mask is white will allow the layer to be visible. Areas where the mask is black will be transparent, and the various shades of grey will be varying degrees of transparency. Now right click on the “Sea” layer and select “Apply Layer Mask”. This will remove pieces of the layer based on what was showing through the layer mask. Here I have made all the other layers invisible to see the result:
    Attachment 1440
    Hey! Hey!!! I think mine looks a lot like Rob's! Screen shot: http://i852.photobucket.com/albums/a...gsomewhere.jpg

    Also, check out the histogram….that is where we start next.
    Oh, boy. Here Rob goes with that damn histogram again... XD

  10. #10

    Default

    Now we want to stretch out the colours in the “Sea” layer across the entire black to white range. With the sea layer selected, auto normalize the image (Colors->Auto->Normalize). The histogram will now have little gaps in it. As the greys have all been spread out. To fix this, select the non-transparent area (by clicking on the “Sea” layer and selecting “Alpha to Selection”. Invert the selection (Select->Invert) and fill the area with white. Remove the selection (Select->None) and apply a 20px Gaussian blur.

    Note the histogram is now filled in.
    Okay. Yeah, I guess it is: http://i852.photobucket.com/albums/a...histogram3.jpg

    Now the next bit of magic. Set the foreground colour to the darkest water colour (water 5) by clicking on it in the Palette Editor (that we set up at the beginning), and set the background colour to the second lightest water color (water 5) by Ctrl-clicking on it.
    Oops. The tut says two Water 5's. I think the second one should be Water 2 probably.

    Now we will turn the B/W into colour, by clicking Color->Map->Gradient Map, and the water is almost (for now).
    Almost... finished?

    Well, well. Third time might be the charm after all!

    Repeat this, flipping the signs, so set X to -20 and Y to 20. This screen grab is after the first one.


    This will give a nice wispy, random looking water edge, once the land is put in place…
    Okay, but my land area isn't white like Rob's example pic.

    Now that the ocean is completed, the land can be build up. Create a cop of the “Sea Shape” layer and name it “Grass”. Create a layer mask using the “Land Mask”channel. Click on the layer icon so we now edit the layer, not the mask.
    Should this mask have been "inverted?" All of the others so far have been. I'm going to leave it checked. Well, no, it doesn't say to have it inverted and it always did before so I'll uncheck it.

    Ctrl-Click on the dark green (Ditch) colour to make it the background and click on the light green (high ground) to make it the foreground colours, then Colour->Map->Gradient Map.
    Nothing happened. :/

    Okay, I looked at Rob's screen shot and his Grass layer is on top. I moved mine to the top and the land turned green.

    Here's what his looks like: http://www.cartographersguild.com/at...7&d=1194634418

    Here's what mine looks like:

    Actually, I'm not going to take the time to upload a screen shot as I'm too tired. Suffice it to say, it looks like ****.

    I don't know. I'll start over again at an earlier step.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •