Results 1 to 10 of 10

Thread: Could I get an opinion on these rivers?

  1. #1
    Guild Apprentice Sam Conifer's Avatar
    Join Date
    Jan 2011
    Location
    minnesota, usa
    Posts
    42

    Question Could I get an opinion on these rivers?

    I made these rivers by making a gimp file with spray painted terrain, opened it up in Wilbur and made rivers in it, then brought it back to Gimp. Once in Gimp I made a copy of the Wilbur terrain and threshed it (thresholded isn't a word it seems) to get the shape of my lake and major rivers. I then bumped a new white layer with the Wilbur terrain and threshed that as well. This second endeavor is to get the river tributaries that were left out by the lake and river shape, however this didn't automatically turn out as nicely so I had to white out random speckles, join water pathways that seemed like they should be joined, and fill in large water pathways which were so wide that they left blank space in their midst. Lastly I had to set the tributary layer to darken only before merging it with the lake shape layer.

    Anyway, the reason for my post is just what my title says. Are these good rivers? Are there any problems with them?
    river opinion.png
    Last edited by Sam Conifer; 03-18-2011 at 04:08 AM.
    Some useful cartography facts:
    Circumference (C) of the Earth is about 25,000 miles or 40,000 km.
    Highest point on Earth is 5.5 miles (8.9 km) above sea level (ASL/BSL).
    Lowest point of land on Earth is 1/4 mile (0.4 km) BSL.
    Lowest elevation in the ocean is 6.8 miles (10.9 km) BSL.

    And our solar system:
    C of Jupiter = 279,118 miles (449,197 km).
    Highest mountain is Olympus Mons on Mars. It is 16 miles high (24 km) and is the size of Arizona.

  2. #2
    Community Leader Facebook Connected Steel General's Avatar
    Join Date
    Jun 2008
    Location
    Ft. Wayne, IN
    Posts
    9,530

    Default

    I don't see any obvious problem with them, they seem to have the 'tree-like' appearance I would expect to see.
    My Finished Maps | My Challenge Maps | Still poking around occasionally...

    Unless otherwise stated by me in the post, all work is licensed under a Creative Commons Attribution-Noncommercial 3.0 United States License.



  3. #3
    Community Leader Facebook Connected Ascension's Avatar
    Join Date
    Jun 2008
    Location
    St. Charles, Missouri, United States
    Posts
    8,392

    Default

    Since the tributaries are not that long I would expect the main branches to be thinner, otherwise okey dokey. A scale would help to know more, though.
    If the radiance of a thousand suns was to burst at once into the sky, that would be like the splendor of the Mighty One...I am become Death, the Shatterer of worlds.
    -J. Robert Oppenheimer (father of the atom bomb) alluding to The Bhagavad Gita (Chapter 11, Verse 32)


    My Maps ~ My Brushes ~ My Tutorials ~ My Challenge Maps

  4. #4
    Administrator Facebook Connected Diamond's Avatar
    Join Date
    Jul 2009
    Location
    Boonsboro MD, USA
    Posts
    7,535

    Default

    Like Ascension says, it seems like the main rivers should be thinner, or at least narrow more as they head towards their source. The layout itself looks great, though.

  5. #5
    Guild Applicant
    Join Date
    Feb 2011
    Location
    Leeds, Yorkshire
    Posts
    2

    Default

    It reminds me very much of the drainage systems you get in swamps, wetlands and mangroves; many small tributaries leading into broad rivers.

    http://maps.google.co.uk/maps?hl=en&...08647&t=h&z=12

  6. #6
    Guild Apprentice Sam Conifer's Avatar
    Join Date
    Jan 2011
    Location
    minnesota, usa
    Posts
    42

    Default

    Thank you for all the valuable information. I wanted to make a forested lake and river terrain. Here is a version with a scale included. I'll have to get used to drawing up a scale early on. If it is useful I have included the Wilbur file from which I am deriving my rivers from.

    river opinion.pngwilbur forest lake 01.png

    I do want to have wide rivers, so based on the opinions above that must mean I need longer tributaries, and due to the lack of space available that might mean I need less rivers. Does that sound right then? I expect it would be hard to see the way tributaries actually look within a forest.
    ------------------------------------------
    Hah, actually looking up the amazon river width I have to change my statement about intended river width. I want the rivers to take up plenty of space on the visual map, but at the same time I want to work with the scale I have included. The Amazon River is like 7 miles wide. I don't want anything like that.

    I think I have to refigure my river width or scale.
    Last edited by Sam Conifer; 03-18-2011 at 04:21 PM.
    Some useful cartography facts:
    Circumference (C) of the Earth is about 25,000 miles or 40,000 km.
    Highest point on Earth is 5.5 miles (8.9 km) above sea level (ASL/BSL).
    Lowest point of land on Earth is 1/4 mile (0.4 km) BSL.
    Lowest elevation in the ocean is 6.8 miles (10.9 km) BSL.

    And our solar system:
    C of Jupiter = 279,118 miles (449,197 km).
    Highest mountain is Olympus Mons on Mars. It is 16 miles high (24 km) and is the size of Arizona.

  7. #7
    Community Leader Facebook Connected Ascension's Avatar
    Join Date
    Jun 2008
    Location
    St. Charles, Missouri, United States
    Posts
    8,392

    Default

    Oh, so these are feet. So the whole area is only a few hundred yards across. At that scale I would expect to see lots of creeks and not a bunch of streams/rivulets. The thing that strikes me, then, is that they have a pretty similar width (roughly 30 feet across) - not that it's wrong or anything but maybe make one thick, one thin, and one medium with a bunch of hairline streams. Personally, at only a few hundred yards I'd expect to see far fewer streams/rivers/etc. unless this was a swamp. All that said, if you like it then go with it. I'm just offering up opinion and there's no real right/wrong here.
    If the radiance of a thousand suns was to burst at once into the sky, that would be like the splendor of the Mighty One...I am become Death, the Shatterer of worlds.
    -J. Robert Oppenheimer (father of the atom bomb) alluding to The Bhagavad Gita (Chapter 11, Verse 32)


    My Maps ~ My Brushes ~ My Tutorials ~ My Challenge Maps

  8. #8
    Guild Artisan landorl's Avatar
    Join Date
    Aug 2007
    Location
    Brandon, FL - USA
    Posts
    553

    Default

    For that scale, it has too many tributaries, unless you are doing a swampy area, which it didn't sound like.

  9. #9
    Administrator waldronate's Avatar
    Join Date
    Mar 2007
    Location
    The High Desert
    Posts
    3,605

    Default

    I recommend poking around in something like Google maps and finding some areas vaguely similar to what you're looking for in order to see how the rivers / tributaries work themselves out. I picked a spot roughly similar to what you described ( http://maps.google.com/?ie=UTF8&ll=3...09602&t=h&z=17 ) and noted that it has much fewer tributaries then shown on your map. Wilbur really works better for regional and world maps than it does for tiny battlemap-type things, I think.

  10. #10
    Community Leader NeonKnight's Avatar
    Join Date
    Aug 2007
    Location
    Surrey, Canada, EH!
    Posts
    5,051

    Default

    I think they are a little too wet, maybe a little drier?






















































    Of course, I am just kidding, I think they look just fine, but the final scale (i.e. east/west map distance in miles) would go a long way defining the rivers.
    Daniel the Neon Knight: Campaign Cartographer User

    Never use a big word when a diminutive one will suffice!

    Any questions on CC3? Post them with CC3 in the Subject Line!
    MY 'FAMOUS' CC3 MAPS: Thunderspire; Pyramid of Shadows; King of the Trollhaunt Warrens; Demon Queen's Enclave

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •