Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: How do I simulate past Ice Ages/glaciation?

  1. #1

    Question How do I simulate past Ice Ages/glaciation?

    I'm a bit hazy on the actual science of what happens to the ground under an Ice Age. I'm looking at trying to quantify the effects and adding them to my world-building script.

    Here's a few of the things I think I've read about, and how it might be simulated in FTPro:
    • Land is pressed down / (elevation is lowered)
    • Hills are ground down / (roughness is lowered)
    • Mountains are eroded / (Incise Flow is applied?)
    • Dirt & rock is deposited at the edge of the glaciation / (??)


    I think I might be able to simulate the extent of the glaciation by tweaking the Albedo/Light/Greenhouse settings, although I'm not sure what valid settings might be. I've played around a little bit, but if anyone can point me to any resources or information to educate my playing around, I would appreciate it.

    Also, if you have any suggestions for methods and settings for the ground effects list above, they would be most welcome.
    My Finished Maps | My Planet Maps | My Challenge Entries | Album: Pre-generated Worlds

    ------
    Assuming I stick with fantasy cartography, I'd like to become a World Builder, laying out not only a realistic topography, but also the geopolitical boundaries and at least rough descriptions of the countries and societies.

  2. #2

    Default

    Interesting... I was playing with trying to simulate glaciation and lowered the Greenhouse setting a bit, just to see what happened, and polar ice caps started appearing. Does anyone know the rules for ocean to start turning into ice in FTPro? Changing the greenhouse to make polar ice caps appear practically froze the rest of the planet, so I'll need to fine-tune it some, but it's an interesting start.
    My Finished Maps | My Planet Maps | My Challenge Entries | Album: Pre-generated Worlds

    ------
    Assuming I stick with fantasy cartography, I'd like to become a World Builder, laying out not only a realistic topography, but also the geopolitical boundaries and at least rough descriptions of the countries and societies.

  3. #3
    Community Leader Facebook Connected Ascension's Avatar
    Join Date
    Jun 2008
    Location
    St. Charles, Missouri, United States
    Posts
    8,392

    Default

    No idea how to do what you're doing since I don't have the software but I do have one tiny thing to add - moraine. That's the pile of rubble at the end of a glacier. In terms of visualizing it, though, I wouldn't bother; it's just some stray rocks of varying size from pebbles to boulders and has no real affect on the terrain. It might be more fertile but that, too, is also not really worth trying to visualize since, if the glacier retreats, the land is still mostly tundra with thin tough grasses and sparse small shrubby trees or, at best, taiga with coniferous forests.
    If the radiance of a thousand suns was to burst at once into the sky, that would be like the splendor of the Mighty One...I am become Death, the Shatterer of worlds.
    -J. Robert Oppenheimer (father of the atom bomb) alluding to The Bhagavad Gita (Chapter 11, Verse 32)


    My Maps ~ My Brushes ~ My Tutorials ~ My Challenge Maps

  4. #4

    Default

    Moraine is what the 5th list item is referring to; I just couldn't remember the appropriate term. FT has a climate called tundra - is tundra pretty much only created by prior glaciation? If so, then just selecting that climate region would be a reasonable shortcut perhaps to tweaking all the climate variables.
    My Finished Maps | My Planet Maps | My Challenge Entries | Album: Pre-generated Worlds

    ------
    Assuming I stick with fantasy cartography, I'd like to become a World Builder, laying out not only a realistic topography, but also the geopolitical boundaries and at least rough descriptions of the countries and societies.

  5. #5
    Community Leader Facebook Connected Ascension's Avatar
    Join Date
    Jun 2008
    Location
    St. Charles, Missouri, United States
    Posts
    8,392

    Default

    No tundra is more of a climate thing than glaciation thing. But I guess that if you had a really colossal glacier it might generate its own climate.
    If the radiance of a thousand suns was to burst at once into the sky, that would be like the splendor of the Mighty One...I am become Death, the Shatterer of worlds.
    -J. Robert Oppenheimer (father of the atom bomb) alluding to The Bhagavad Gita (Chapter 11, Verse 32)


    My Maps ~ My Brushes ~ My Tutorials ~ My Challenge Maps

  6. #6
    Administrator waldronate's Avatar
    Join Date
    Mar 2007
    Location
    The High Desert
    Posts
    3,605

    Default

    In FT's gaia shader, ice caps form at +/- 76.5 latitude plus an fBm noise factor. No, you can't change it.

    In FT's climate shader, ice caps form at an annual average temperature of -10C. No, you can't change it. Other climate types appear according to an internal lookup table ( http://www.ridgenet.net/~jslayton/climateinfo.gif ). The image climate shader lets you put an arbitrary picture over that climate image to determine the coloring.

    I am more likely to play with the "Specify Base Temperature" options in FT to control the worldwide temperature than I am to try to use the "Physically-based Base Temperature" options.

  7. #7

    Default

    Hmm... okay. If I understand the temperature mechanism correctly, changing the Base Temp would equally and evenly change the temps across the globe. So if it's set at the default of 59.5, and I changed that to 54.5, the temp would drop uniformly around the map by 5 degrees.

    Which means it fakable using scripts by selecting temps 5 degrees higher than the ostensible target.

    Of course, the chance that I understand the temperature mechanism is at best 50/50.

    Right now I'm looking at selecting everything 48 degrees or less and below 7500 ft elevation, then lowering the roughness by .1 and elevation by 500 ft. No idea how realistic that will be yet. I still have to play with it.
    My Finished Maps | My Planet Maps | My Challenge Entries | Album: Pre-generated Worlds

    ------
    Assuming I stick with fantasy cartography, I'd like to become a World Builder, laying out not only a realistic topography, but also the geopolitical boundaries and at least rough descriptions of the countries and societies.

  8. #8
    Guild Journeyer gilgamec's Avatar
    Join Date
    Mar 2009
    Location
    Colonia Claudia Ara Agrippinensium
    Posts
    130

    Default

    Quote Originally Posted by Master TMO View Post
    I'm a bit hazy on the actual science of what happens to the ground under an Ice Age. I'm looking at trying to quantify the effects and adding them to my world-building script.
    ...
    One telltale sign of glaciated terrain that you haven't mentioned is the specific shape of glacial valleys; they start with big bowl-shaped areas called cirques near the top of the valley (which often fill in with lakes after the glacier retreats), then this U shape continues down the valley; this gives you smoothly sloped bottoms near the middle of the valley, with steep slopes up to the surrounding hills. I'm not certain that an incise-flow tool would give you that sort of shape, but I'm not familiar enough with FT to know if there's a tool for doing what you'd need.

  9. #9

    Default

    Very interesting. I doubt I could get incise flow to do the cirques, but the rounded valley might be possible. I'm no expert on incise flow either and will have to play. Good info, thanks!
    My Finished Maps | My Planet Maps | My Challenge Entries | Album: Pre-generated Worlds

    ------
    Assuming I stick with fantasy cartography, I'd like to become a World Builder, laying out not only a realistic topography, but also the geopolitical boundaries and at least rough descriptions of the countries and societies.

  10. #10

    Default

    Okay, here's an image created with Incise Flow and Fill Basins with Water. Can you folks critique it for me? Good, bad, so-so?

    A000000.jpg

    Update: Not sure if that's a good enough view of the area. I'll add a larger range view in a bit.
    Last edited by Master TMO; 07-01-2011 at 06:40 PM.
    My Finished Maps | My Planet Maps | My Challenge Entries | Album: Pre-generated Worlds

    ------
    Assuming I stick with fantasy cartography, I'd like to become a World Builder, laying out not only a realistic topography, but also the geopolitical boundaries and at least rough descriptions of the countries and societies.

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •