Page 1 of 3 123 LastLast
Results 1 to 10 of 28

Thread: Lampshade

  1. #1
    Software Dev/Rep Hai-Etlik's Avatar
    Join Date
    May 2009
    Location
    48° 28′ N 123° 8′ W
    Posts
    1,333
    Blog Entries
    1

    Default Lampshade

    I have a rather old lamp with a plain conical shade that has fallen apart and two thoughts occurred to me: I could make one of those, and if it's a cone, I could use a conical map projection to decorate it.

    So I measured it, and started playing with the idea in Geogebra.

    lampshade-map.png

    The angles on the right are the standard parallels for an equidistant conic projection. The angles on the left are the parallels where the top and bottom of the shade would be.

    Initially I had used the top and bottom of the lamp shade as the standard parallels, but then I realized I could reduce the distortion by moving the standard parallels in a bit. Hence the points F and G. I then tweaked them to get the distance between the projection surface and the sphere about equal at the top, bottom, and middle.

    So now I just need to decide if I want to use some real world data or a made up world, and make a map out of it using this projection.

  2. #2

    Default

    Neat! I have seen commercial lampshades done with an older, "Age of discovery"-style map, but had never thought of doing something like that myself.

  3. #3
    Software Dev/Rep Hai-Etlik's Avatar
    Join Date
    May 2009
    Location
    48° 28′ N 123° 8′ W
    Posts
    1,333
    Blog Entries
    1

    Default

    Quote Originally Posted by junius_gallio View Post
    Neat! I have seen commercial lampshades done with an older, "Age of discovery"-style map, but had never thought of doing something like that myself.
    Yes, though I doubt they would have gone to the trouble of projecting the map onto a surface the same shape as the lamp shade. I readily admit that it's stupendously geeky and obsessive.

  4. #4
    Professional Artist Facebook Connected Coyotemax's Avatar
    Join Date
    Jul 2009
    Location
    Canada
    Posts
    1,945

    Default

    Maybe so, but I think it's worth doing.

    photos!!!

    My finished maps
    "...sometimes the most efficient way to make something look drawn by hand is to simply draw it by hand..."

  5. #5

    Default

    Quote Originally Posted by Hai-Etlik View Post
    Yes, though I doubt they would have gone to the trouble of projecting the map onto a surface the same shape as the lamp shade. I readily admit that it's stupendously geeky and obsessive.
    Oh, no--these weren't projected--when you saw the seam, it was quite obvious that they had cut the shades from material where the map was simply printed as a flat map on a flat sheet. These "lampshade projections" are just too cool!

    I second Coyotemax--pics when finished!

  6. #6
    Software Dev/Rep Hai-Etlik's Avatar
    Join Date
    May 2009
    Location
    48° 28′ N 123° 8′ W
    Posts
    1,333
    Blog Entries
    1

    Default

    Crap, I just realized I screwed up. The slant length of the projected cone would be the length of the arc, not the segment. This is going to be a bit more complex.

  7. #7

    Default

    This sounds fun.

  8. #8
    Software Dev/Rep Hai-Etlik's Avatar
    Join Date
    May 2009
    Location
    48° 28′ N 123° 8′ W
    Posts
    1,333
    Blog Entries
    1

    Default

    Quote Originally Posted by dangerdog15 View Post
    This sounds fun.
    Not so fun after a few hours of trying to solve it.

  9. #9
    Software Dev/Rep Hai-Etlik's Avatar
    Join Date
    May 2009
    Location
    48° 28′ N 123° 8′ W
    Posts
    1,333
    Blog Entries
    1

    Default

    OK, I'm pretty sure I've got it this time.

    lampshade-map-3.png

    I ended up cheating a bit. I constructed H' such that arc HH' would be the correct length sₒ given any particular H and I, and then adjusted I until H was at the right distance from the y axis.

  10. #10
    Software Dev/Rep Hai-Etlik's Avatar
    Join Date
    May 2009
    Location
    48° 28′ N 123° 8′ W
    Posts
    1,333
    Blog Entries
    1

    Default

    I've decided to do a map of Earth in the style of my Baakoi map. I'm currently putting together some data from free sources in QGIS, then I'll export to SVG and load into Inkscape for styling.

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •