Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Nosgoth, my first try...

  1. #1
    Guild Member Morgan's Avatar
    Join Date
    Mar 2012
    Location
    Naples, Italy
    Posts
    84

    Default Nosgoth, my first try...

    This is my first try, still a work in progress. I have to say thanks to Pasis for his great tutorial, otherwise this wouldn't have been drawn.
    This is a revisited map of Nosgoth, the world from the Legacy of Kain seires. It is not labeled yet, and I still have to work on some details, but I'd like to know what you think about it.
    Also I'd like to ask ome advice. Since it has pretty complex textures I find that adding some parchment or cloth texture to add a drawn effect results in a chaotic result.
    I'd still like to add some texture and a coherent border, any hints? Also, what do you think about color and brightness?
    Attached Images Attached Images

  2. #2
    Guild Member Morgan's Avatar
    Join Date
    Mar 2012
    Location
    Naples, Italy
    Posts
    84

    Default

    Ok, perhaps the solution was right in front of my eyes and I didn't see it...
    I tried to remove the noise and clouds levels. Since there are a lot of textures I don't seem to need additional random variation to the terrain. I think the result is more polished and clear. What do you think?
    Attached Images Attached Images

  3. #3
    Guild Expert jbgibson's Avatar
    Join Date
    Oct 2009
    Location
    Alabama, USA
    Posts
    1,429

    Default

    Awesome first try at the style, Morgan. First your questions - the color & brightness work well, especially the second version. Only trouble is you're going to have the dickens of a time putting labels in and getting them legible without taking over the show. The lighter texturing of the second one will help with that, plus as you say there's plenty of variation already; too much starts to muddy the look.

    As far as any paper texture at all - think about what you've got. This is a near-photographic satellite view. THere's even sun-glint on rough water, or maybe debris in the water in places. How did a cartographer put it on a surface? Is it painted? If so, perhaps it's on a dead-flat substrate. Just what you decide for a margin is going to make the medium more obvious, so you can tell a bit of story just with how it's presented. If it's a period piece, no way is it mass produced. So your margin might indicate the wall it's painted on, or the sheet of metal, or whatnot.

    Now since I've got to keep this RP badge shiny, I have thoughts about your water. It's not quite a satellite view, since I assume you've exaggerated width of some rivers so they'll show. Some can be estuaries and actually BE kilometers across, but not all, not plausibly. And I almost have to read the majority of the water as being right at sea level -- the little neck of an isthmus NW of center doesn't have shading or terrain to make the eastern body of water appear any higher altitude than the western side. The fairly regular widths and particularly narrow width of one of those skinny watercourses sure look like you're saying "rivers connecting a series of lakes" but visually I'm not buying it. If you really do want them all sea-level, you could "say so" better by varying their width more.

    One place just SE of center you've got a decent-sized river implausibly splitting. Again - I'd buy that as an estuary where the island is bounded by drowned valleys, only the skinniness of them says "river". Rivers pick one best course downhill, and only under rare circumstances would you find a split of that size. And speaking of "one way only", you ought to break apart the triple-join of headwaters atop the mountain a tiny bit E of dead-center. A mountaintop lake could source a river, but only one. If there were ever two outlets at the same altitude, one would quickly "win out" over the other.

    The textures and topography are all very nicely done. The scale sends a bit of a mixed message though. The trees in that NW basin "say" it's maybe a mile across, while the mountains ringing it declare no, it's a hundred or more miles across. THe volcano's awesome. The lava pattern says to me "cracks" rather than "flows", but that's nitpicking. It expresses very well that the place is a glowing window into the netherworld and I don't want to get too close.

    What do you figure on using it for? That'll slant just how you want to border and label it.

    My time's been so limited I'm going ahead and bestowing a smidgen of rep - it's worth that, already. Good work - dare you to make it better!

  4. #4
    Guild Member Morgan's Avatar
    Join Date
    Mar 2012
    Location
    Naples, Italy
    Posts
    84

    Default

    Hi jbgibson, thank you very much for your in-depth reply!

    I'm also satisfied with the second version. I think that textures and colors work just fine. Haven't decided the margin yet, but that will come.

    Meanwhile I'd like to stick on your advices. You're right, the scale is not correct. I will try reducing the size of the trees texture and brush.
    I agree about the rivers too. I reproduced the original map from a videogame, but it was in calligraphic style, and I think I made the map too small. The reliefs in the north should be a huge mountain range, I think. It's hard to say 'cause there was no scaling meter. I think I will draw it again from scratch trying to keep a coherent scale, and revisiting when necessary to keep realism. Speaking of which, I will smudge those lava cracks a bit and see what happens!

    Honestly, I don't know if I'll actually use this map. I'm just practicing for now. Then my long term project is a full world map that I'd like to use for a novel series. And, besides, it's fun!

    Thank you again for the feedback and rep! I swear I didn't expect that! :O
    And I accept the challenge. I'll make it better. I'm here for that!
    I hope to have a new sketch soon!
    Happy mapmaking!

  5. #5
    Professional Artist cereth's Avatar
    Join Date
    Jan 2008
    Location
    Ohio
    Posts
    499

    Default

    That volcano is quite impressive. For a first try it's great and I really look forward to where you go next!
    "Listen, strange women lyin' in ponds distributin' swords is no basis for a system of government."

    My Albums - My Portfolio

  6. #6
    Guild Member Morgan's Avatar
    Join Date
    Mar 2012
    Location
    Naples, Italy
    Posts
    84

    Default

    Thank you!
    I think I will be practicing some more with satellite-view like maps, then I'd like to try some hand drawn. Some on this site are really awesome!
    Well, one thing at a time. Now back to understanding scaling!

  7. #7
    Community Leader Lukc's Avatar
    Join Date
    Sep 2011
    Location
    Seoul, South Korea
    Posts
    1,573

    Default

    It looks great, no doubt about it I'll be watching how this turns out.

  8. #8
    Guild Adept loogie's Avatar
    Join Date
    Mar 2008
    Location
    Strathroy, ON
    Posts
    371

    Default

    great for a first try!!!??? you kidding? i love this! great job man!

    One thing I noticed, and I've found in other maps.. when your trying to go for a reflective look on water... I'm assuming you used a textured layer and used a mask to have it show through on all the water... if you wanted it to pop a bit more, you might want to add reflection to the waterbodies individually.. a lot more work, but it'd make a difference i'm sure.. of course that's a lot more work I know the USGS guys add reflections to their maps by hand sometimes, it's all about making it look realistic to the user (much like how when you see an rich green aerial photo it's not the real colour, it's replaced the green band with Infrared and messed with the colours... Wierd tricks of the trade, but on such a realistic looking map, it might work well on yours map.. not something i've done, so i can't say how.. but i know they do it..
    Photoshop, CC3, ArcGIS, Bryce, Illustrator, Maptool

  9. #9
    Guild Artisan Katto's Avatar
    Join Date
    Apr 2009
    Location
    Dortmund, Germany
    Posts
    709

    Default

    Really impressive for a first map!
    I don't know if it was mentioned yet, but the woods and the mountains seem to have a different scale.
    Have some rep

  10. #10
    Guild Member Morgan's Avatar
    Join Date
    Mar 2012
    Location
    Naples, Italy
    Posts
    84

    Default

    Oh, thank you all so much, I'm sooooo flattered!
    I have experimented a bit with different styles, and I'm currently working on a brand new version which also includes some techniques from Tear's tutorial. I hope it turns out good, for now it's too early to say! I've just done water for now, and it looks good, it has reflection, too!
    Oh, and I'm trying to solve the scaling problem, too. Is it just me or Photoshop has a limited amount of depth with Bevel and Emboss that prevents you to make bigger mountains?

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •