[Award Winner] Antique-style maps in Photoshop

[Ascension]

1. This is my first attempt at the antique style so it may grow and change in time. This is in Photoshop so I’m not sure if the details of the techniques translate to other programs but it should be fairly easy to make whatever changes as these techniques and tools are pretty standard.

2. First off, let’s set up the document: 2000 X 2000 at 300 ppi, rgb mode, 8 bit. Set colors to black and white. Filter > Render > Clouds ((pic antique 1)). Copy this layer. Create a new blank layer. Edit > Fill = 50% gray. On the layers palette, set the mode to Hard Mix, this gives us a black and white interpretation of the underlying clouds without the grays ((pic antique 2)). Rename this layer to “land” – to do this, on the layers palette, double-click on the layer name itself. Click on the “background copy” layer. Grab a big airbrush, set the flow to 10%, and use black to fill in the ocean and white for the land. Our landmasses should be white and the ocean should be black ((pic antique 3)). When happy, link with the “land” layer, click on the “land” layer, merge down (ctrl-e). Make sure that black is the foreground color then Select > Color Range > use black with a fuzziness of anything. Hit the Delete key then deselect (ctrl-d). Click on the “Background” layer and create a new layer, rename it to “ocean” and then Edit > Fill = 50% gray. Click back on the “land” layer. Add a layer style of Stroke…set the size at 2, color is black, and position is inside. We now have our landmass done, pretty easy too ((pic antique 4)). One thing to keep in mind is that when doing this style of map it is important to have a good deal of empty space in one or two corners. This will allow us to have some space to put in the title graphics, compass, scale, clipart, etc.

[Ascension]

3. This part is a little tedious but necessary…rivers (ugh). On the layers palette ctrl-click on the “land” layer. Create a new layer and rename it to “rivers”. Make sure you have the pencil tool and not the brush tool and grab the “Hard square 2 pixels” tip. On the Brushes palette, click on “Brush tip shape” and set the spacing to 1%. With black draw a bunch of squiggles starting in the ocean and going inland…since we have a selection of our land layer the lines will only be drawn on the land and not the ocean. Change over to a 1-pixel tip for minor rivers and don’t forget to put in forks and branches in the rivers ((pic antique 5)). By defining our rivers first we can use the open space left over for the mountains, swamps, deserts, etc.

4. Mountains are a two-step process. Create a new layer and rename it to “mountains 1”. Still using the pencil grab a big tip, I’m going with the default Soft round 27-pixels. Check your spacing on the tip and set it to 1% if you need to. Draw in some basic lines, not shapes ((pic antique 6)). Create a new layer and rename it to “mountains 2”. Change from the pencil to a brush and use the default Hard round 3-pixels and set the flow at 100%. Zoom in to 100%. Now add a bunch of cilia (hair) around the outside of the mountain line…it should look like a paramecium ((pic antique 7)). When done, hide the “mountains 1” layer and take the 2 off of the other mountains layer. Now our basic topography is done. A more modern take on this approach is to taper the lines. To do this, click on the Brushes tab then click on Shape Dynamics. Underneath the Size Jitter is a box that will probably say “Pen pressure”…change this to Fade and set the amount of how much you want the taper to be.

[Ascension]

5. Click on the “Background” layer and create a new layer, rename it to “white” and fill it with white. Click on the “ocean” layer and add a layer style of Gradient overlay…use a very light teal-blue to a very light pink. My colors are: blue = BEDCE6 (rgb 190, 220, 230) and pink = F5D7D7 (rgb 245, 215, 215). Drop the opacity of the gradient to 50% ((pic antique 8 )). Copy the “white” layer and rename it to “noise”. Next, move it to the top of the layers palette. Filter > Noise > Add noise = 50% and make sure that monochromatic is unchecked (this gives colors). Set the layer’s mode to overlay. Create a new layer and rename it to “aging”. Change the foreground color to something tan with a bit of red in it…I used 84745E (rgb 132, 116, 94). Now change the layer’s opacity to 15%. Filter > Texture > Texturizer = use canvas as the texture, set the scaling at 50%, the relief at 5, and the light is at the top (this puts the emphasis on the horizontal lines whereas top left gives us something more 3d than what we want) ((pic antique 9)).

[Ascension]

6. Now we need to put in the rings around the landmasses so reset the colors to black and white. Click on the “land” layer and create a new layer. On the layers palette ctrl-click on the “land” layer…this loads this layer’s selection. Select > Modify > Expand = 1. Fill with white and deselect. On the layers palette, change the fill to 0%. Add a layer style of stroke, 1-pixel, black, outside. On the layers palette, right click on this layer and choose “Copy layer style”. Create a new layer and ctrl-click on “Layer 1”, Select > Modify > Expand = 2. Fill with white and deselect. On the layers palette, right click on this layer (it should be Layer 2) and choose “Paste layer style”. Continue doing this until you have 10 layers/rings, expanding the selection by 3, then 4, then 5, etc. Once you have 10 rings, link the layers in the layer palette…you do this by clicking the empty box between the eye and the layer preview pic. Merge these layers together (ctrl-e). Rename the resulting layer to “rings”. Filter > Blur > Gaussian blur = 0.3. Click on the “rivers” layer and hit ctrl-f (this applies the last used filter to this layer…in this case the blur). Move the “noise” layer underneath the “land” layer. Move the “rings” layer underneath the “land” layer ((pic antique 10)). Copy the “rings” layer if your rings look too light.

[Ascension]

7. Let’s tweak the aging a little bit so click on the “aging” layer and create a new layer. Rename it to “brown” and fill with the brown we used earlier (84745E). Ctrl-click on the “land” layer in the layers palette. Select > Modify > Expand = 100. Expand 2 more times. Select > Feather = 100. Hit the delete key 5 times and deselect. Change the layer’s mode to Color burn.

8. Let’s put in the countries. Click on the “land” layer and create a new layer. Use whatever size pencil you want and draw in the first country…draw out into the ocean as well then fill the whole shape ((pic antique 12)). Draw each new country on its own layer and each in a different color ((pic antique 13)). Once you have all of your countries in place, ctrl-click on the “land” layer and Select > Inverse. Hit the delete key on each country layer. This deletes the fill out in the ocean. When done, deselect. Now to prevent our countries from overlapping, we will do something similar for each country. Click on your first country (in the layers palette). Ctrl-click on this layer then click on the layer of a country that touches this first country. Hit the delete key and do the same for any other country that touches this first one. Continue this process on down the line for all subsequent countries ((pic antique 14)). Next, for each country change the layer’s fill to 0%. Click back on the first country layer. Add a layer style of Inner glow…use red, opacity is 75%, size is 10. You can use as many different colors for the countries as you like but try to use at least 3, I have used 8…red, orange, yellow, brown, green, blue, purple, and gray. Next, each country will get a layer style of Pattern overlay. The pattern I use is one of diagonal lines set to multiply with an opacity of 35%. You can use whatever pattern you choose as long as it is gray-scale. If you happen to have some pattern that you would rather use then skip ahead to the next step. I have also flipped the pattern so that the lines go a different way in order to help accentuate each country from another. Lastly, each country gets a layer style of Color overlay that matches the color of the inner glow set to overlay at 67% opacity…thus I have 8 different color overlays. The pattern overlay in multiply mode ensures that the white lines of the pattern will be invisible and the color overlay in overlay mode combines with the black lines of the pattern to produce a colored line pattern. Lastly, turn down the opacity of each country’s layer to 50% ((pic antique 15)).

[Ascension]

9. Our layers palette is getting quite long so let’s fix that. Click on the “land” layer. At the bottom of the layers palette you will see an icon that looks like a little folder…click that. This inserts a folder into our layers palette and you can name it whatever you like…I named mine “main map”. Drag each of the layers that are below this folder onto the folder name itself (you will see a brown glow around the name of the folder). Once done, click on the little triangle to the left to collapse the view. Click on the topmost country layer and repeat this process. You should have 4 layers above that are not in folders; rivers, mountains, aging, and brown.

10. Let’s add some cities now. Change back to the pencil and grab the Hard round 5-pixels tip. Click on the “mountains” layer and create a new layer, rename it to “cities”. Put a dot wherever you want it. On the layers palette, right click on this layer and choose “Paste layer style” (this puts that 1-pixel black stroke around the dot and makes the dot itself invisible). Since this is supposed to be something more modern we will need lots of cities and towns…we do not need to make this a sparsely settled map like we would for something medieval. Also, what makes this style map seem nice is the sheer amount of text on it, but I’ll get to that later…for now put in lots of dots. We will only name cities and towns so don’t worry about that too much…yet. I put dots at every river delta, wherever two rivers meet, and then wherever seems kind of empty ((pic antique 16)).

11. Now the ultra tedious part…naming all of that stuff. Cities and towns use Times New Roman but the towns are italicized. Set the font size to 4pt for cities and 3.5pt for towns. As a rule of thumb I use 2 towns to 1 city. Once you have all of the cities and towns named merge them all together and rename this layer to “city names”. Change the layer’s opacity to 75% and add a layer style of outer glow...the color is F5F5F0 (rgb 245, 245, 240), mode is screen, opacity is 75%, spread and size are both 10. What really makes this style of map cool is the sheer amount of text you can cram into it and still be relatively legible. So, although it is tedious, try to name as many things as you can, I have not since this is just a tutorial ((pic antique 17)).

[Ascension]

12. Let’s give our continent a name. For this we’ll use the font Times New Roman again but in all caps and we’ll adjust it a bit. First, go ahead and type the name with a font size of 12pt. Next open up the Character window. You will see a capital T with an up and down arrow beside it; this is the Verticality scale. Change it from 100% to 75%. This squashes our letters a bit and looks cooler. Next, you will see AV with a left and right arrow underneath of it; this is the Tracking (the space between letters). Set this number to 900. Lastly, at the very top of the screen you will see a T with a little hill under it; this is the Warp tool. Set this style to Arc, Horizontal, and a +10% Bend. Position the text somewhere near the center of the continent. Try not to let this text overlap the text for cities and towns but if it does, then click on the “city names” layer and drag a marquee around the text and move it so that you can read it then deselect. Apply the same layer style as in step 11.

13. Oceans are done the same way as in the last step but with a smaller font size and in italic…I use an 8pt font. Also, they are often rotated to fit a coastline. Bays, coves, and smaller water bodies use upper and lower case letters and smaller font size. Once you have all of your water bodies named merge them together and apply the same layer style as in step 11 ((pic antique 1).

14. Country names are done in Arial, in all caps, with the same vert scale and the tracking varies depending on how wide the country is. For countries that are tall and skinny you will have to put the text on two lines (make sure you hit the enter key after the first word with no space) and make sure that the text style is centered and not left aligned or right aligned. Also, change the Leading in the Character window. It looks like an A on top of another A with a line between them and an up and down arrow beside them. This changes the amount of space between text lines. Once this is all done, merge the layers and apply the same layer style as in step 11.

15. Geologic features, like mountains, deserts, etc. are in italic Arial, in all caps, but set the vert to 120% and the tracking is 0%. Again, merge the layers and apply the layer style.

16. Rivers are done in italic Times New Roman with a vert of 125% and 0 tracking (and a small font size). They are also warped to fit the bends of the river. This step can take the longest if you have a large amount of rivers. For this tutorial I am not going to name my rivers as it will take way too long to do so.

[Marlow]

Next, for each country change the layer’s fill to 0%. Click back on the first country layer. Add a layer style of Inner glow…use red, opacity is 75%, size is 10.

Hey, I keep running in to a problem at this point. When I add the inner glow, it will only show up on the parts of the country that are on the shore. It won't show up on any part of the country's border that is touching another country.

All these layers are above the land, so it's not that problem, and I'm at my ends. Anyone have any idea why this is happening?

[AslanC]

Hey, I keep running in to a problem at this point. When I add the inner glow, it will only show up on the parts of the country that are on the shore. It won't show up on any part of the country's border that is touching another country.

All these layers are above the land, so it's not that problem, and I'm at my ends. Anyone have any idea why this is happening?

I am having the same problem and was going to post, but you beat me too it.

Would love to know how to fix this