Painted Ocean Waves in PS

[Tom_Cardin]

3. Create a new layer on top of the ocean you just "painted". Now comes the fun part...don't worry if you can't draw a straight line, that actually works against you now!.. identify the divisions of light and dark in the ocean, the big ones you created in step one, not the little effects from step 2, its these divisions you are going to focus on. Make a small round brush, about 65% hardness and size 10 or so depends on the pixel scale for your map, adjust accordingly when you see what happens. I set shape dynamics to pen pressure. Scattering is set to 200% with control off. Now choose white color and set brush opacity at 40%. You can do this with a mouse as well, just ignore the shape dynamics and make your brush about half the size, about 5 in my case. Now you are ready to paint waves...scatter them loosely along those divisions of light and dark. Make your waves scallop shapes running parallel to your shorelines, make some short and some long, its ok to be fairly chaotic, it helps, just don't paint over the a wave that is already drawn otherwise you will have an area of double brightness. It is easiest to draw the waves closest to the shore first and radiate outwards, embrace the natural patterns this creates and continue them. Also as you move outwards from land you can drop your opacity down as an option...here I kept my opacity at the 40% all the way, but I did draw the waves more and more loosely as I went outwards. - Erase waves you aren't thrilled with and just keep things fast and loose, the definition will be there eventually.

Addendum: Don't worry about details too much, though if your waves are going to be quite large you can go back in with a smaller brush and add some more splatters to the leading edges.

[Tom_Cardin]

4. Now its time to add a bit more definition to the waves, reduce the scattering to about 150% and make your brush a bit smaller 6 is fine, set your opacity to 80%. Now you are going to paint highlights on the same layer on the edges of the waves closest to your landmasses, or if you have scalloped them well then keep them on the convex edges. Start very lightly, this white is going to look blinding at first so just go light and scatter this highlight to a few places on each wave, keeping it primarily to the center and always on the edge facing the nearest land. This step is going to take a while, but patience pays off. I know I know, I promised some definition but they still don't look like much more than chalkboard scribbles yet.

Addendum: For some added spray details you can make your brush smaller again and add a few splatters of white just in front of the leading edge of the wave.

[Tom_Cardin]

5. Time to make a mess of things....well actually to smudge things. If you are not already in love with the smudge tool in photoshop this will push you over the edge. New smudge brush, make a size 8 circle brush, again with about 65% edge hardness. We want the shape dynamics on pen pressure again and scattering set to about 250% and control set to pen pressure. Set strength to about 80%, but feel free to tweak this to get the effect you want. This part is the fairly time consuming, we are going to smudge eyelashes on each wave, drag from about halfway between the leading edge and the trailing edge (leading edge being the edge closest to land) and pull outwards away from land. Space each lash irregularly, again chaos is our friend, some lashes should be long and some short. Vary your pen pressure and the speed at which you flick out each lash. When you are done you will have something that is recognizable as waves, but there is more to do.

Addendum: You can lengthen some of the lashes even more by dragging out with the smudge tool again from the mid point of the lash. Some waves can leave quite long trails of foam especially when they break gradually.

[Tom_Cardin]

6. Now we paint with the eraser, this is the most time consuming part. Set your brush to about size 6, 65% hardness and shape dynamics to pen pressure. We are going to cut into the trailing edges of the waves and both clean things up and add more painterly style to the whole deal. Similar to how we made the lashes in the previous step we are going to start our eraser strokes just behind the brightest areas of foam and stroke outwards and away from land, making some of the lashes narrower and erasing most near the ends of each wave so that they taper more. You can also erase some from the leading edge of the waves, creating more spray in the whiter areas, just don't overdo it...this part is fun because you can see the final waves take shape as you cut away at them. Again use very light, short, quick strokes. Use this opportunity to clean up mistakes and ensure the flow of the lashes and the waves are contoured pleasingly. Yes I know I am being very subjective here but its time to let your artist out. Depending how you sweep and curve your erasures you will end up with all kinds of looks, its possible to go from realism to stylized almost anime looking waves at this point. I suppose I am somewhere in between with this particular image.

Addendum: You may want to go back and forth some between this step and step 5 with the smudge tool, especially where your erasures look too regular and to smudge out some of the sharper trailing edges of the lashes. You can see how I did this in the close-up view.

[Tom_Cardin]

7. Last part! Lets make the waves furthest from land more transparent so that the focus of our map comes back to the landmass itself. You may want to take the whole wave layer and turn its opacity down some. I reduced the opacity of my layer to 75%. Then using a large soft eraser (size 60-80, hardness 0%) set to 10% opacity and no shape dynamics I started carefully erasing - just to lower the opacity of the outermost waves initialy but working inwards, leaving the waves closest to shore alone.

Addendum: You can also with a bit smaller eraser go over the outer ends of the waves to dim them a bit more - and the inner areas between scallops if you have a long wave with multiple scallops. Again its just a slight change really but it just adds a bit more depth and variance that says "painted".

[Tom_Cardin]

Here is the map I am working on using this technique. It is a map of my son's campaign world which I am illustrating for him from his direction. I am using an isometric perspective and as you can see its still very much at the beginning. I was really happy with how the water came out and I thought I would share my process.

[Molch]

It is a map of my son's campaign world which I am illustrating for him from his direction.

You are an awesome dad if I may say so. Also I love the waves!

[jfrazierjr]

5. Time to make a mess of things....well actually to smudge things. If you are not already in love with the smudge tool in photoshop this will push you over the edge.

HERE HERE!! Smudge has been my fav tool for quite a while..