Page 4 of 5 FirstFirst 12345 LastLast
Results 31 to 40 of 49

Thread: Crater lake

  1. #31

    Default

    Quote Originally Posted by pasis View Post
    Attached is a guick guide on how to create the houses in the village. I had no time to describe all the steps in smallest detail, but I hope you can follow it anyway.
    First off, thanks a million for posting this, it's super helpful! Second, I had considered the method of pre-creating building symbols to then stamp onto a map and rotate. However what made me decide against this method was that it seemed I would run into problems with lighting inconsistencies when I rotated the symbols (e.g. the shadows on the chimneys are now at the wrong angle etc), and so would have to change the lighting for each building individually. Is this a problem you've encountered, and if so, what's your solution?

    Cheers,
    -Arsheesh

  2. #32
    Guild Artisan pasis's Avatar
    Join Date
    Jan 2009
    Location
    Helsinki, Finland
    Posts
    535

    Default

    I suffer from the same issue, but there are ways to minimize the work.
    The shadows don’t have to be spot on. You can rotate the house about 45 degrees to either direction without a need for redoing them. But the need for changing the light direction still exists.
    I have created all the houses in one PS file where all similar items of every house are in the same layer. I mean all roofs facing one direction are in one layer, all roofs facing other direction are in another layer and all chimneys etc. are in yet in another layer.
    By changing the direction of the global light source you change all drop shadows and bevels at the same time. Then you just need to change the exposure of the adjustment layers to get the roof shadows right.
    It takes just one minute to make all the changes and it applies the changes to all of your houses in one go.

    If you could invent a way to do the roof lighting in a way that it would rely on PS global light source as well, the problem would be solved. You could have all your house layers in your map file itself and you could rotate them as you like and the lighting would work.

  3. #33

    Default

    Quote Originally Posted by pasis View Post
    I suffer from the same issue, but there are ways to minimize the work.
    I have created all the houses in one PS file where all similar items of every house are in the same layer. I mean all roofs facing one direction are in one layer, all roofs facing other direction are in another layer and all chimneys etc. are in yet in another layer.
    By changing the direction of the global light source you change all drop shadows and bevels at the same time. Then you just need to change the exposure of the adjustment layers to get the roof shadows right.
    It takes just one minute to make all the changes and it applies the changes to all of your houses in one go.

    If you could invent a way to do the roof lighting in a way that it would rely on PS global light source as well, the problem would be solved. You could have all your house layers in your map file itself and you could rotate them as you like and the lighting would work.
    OK, thanks for the explanation. I didn't realize PS had a global lighting feature that affected multiple layers. I'm working with GIMP and, to my knowledge, such a feature doesn't yet exist. So this will likely mean more work on my end if I use your method. That said, I really like the results so it may be worth it.

    Cheers,
    -Arsheesh

  4. #34
    Guild Artisan pasis's Avatar
    Join Date
    Jan 2009
    Location
    Helsinki, Finland
    Posts
    535

    Default

    Here is an overall map of the crater lake surroundings. Next I'll add more details and habitation.
    Attached Images Attached Images

  5. #35
    Guild Artisan Pixie's Avatar
    Join Date
    Jan 2014
    Location
    Lisbon
    Posts
    939

    Default

    I second what everyone has said so far - this is wonderful work.
    A view of the entire area, with the houses very little down there makes the landscape appear much more impressive. That set of mountains and the slopes toward the lake must be an oasis of greenery in an otherwise dry region. I truly truly like it.

  6. #36

    Default

    It's such a beautiful map pasis! I love your texture work. Thank you so much for sharing more of your technique too! I've always wondered how you get the houses to look so realistic. Never would have thought it was such a relatively "simple" process. They actually looked to me like photos of real buildings cut out from some satellite photos. The clear water effect looks spectacular. I like it much better than if it was a flat texture. I'm curious, how do you get the waves to look so convincing? Is it just more texture painted in? Those waves visibly breaking on the shores of the bodies of water add so much to your maps. It's one of those little details that makes them look all the more like actual satellite photos of real world places.

  7. #37
    Guild Artisan pasis's Avatar
    Join Date
    Jan 2009
    Location
    Helsinki, Finland
    Posts
    535

    Default

    Thanks Lyandra and Pixie for your kind comments.
    Lyandra - Yes the waves are indeed just another texture. The texture is a closeup from an ocean foam and with few modifications I managed to turn it into waves

    This will be the last WIP for a while so I attached a full resolution version. I will continue after few weeks but as I'm quite far with this already it shouldn't take too long to get it finished...
    Attached Images Attached Images

  8. #38
    Guild Adept Facebook Connected Llannagh's Avatar
    Join Date
    Aug 2013
    Location
    Germany
    Posts
    318

    Default

    Jesus. That style was something I originally wanted to achieve sometime until I decided against it for practical reasons (e.g. lack of skill ).

    I don't have the time to read throughn the whole thread right now, but I take it you're using lots of textures? Also the lighting effects that come with Photoshop?

    Anyway, that's really impressive.

  9. #39

    Default

    Quote Originally Posted by pasis View Post
    Thanks Lyandra and Pixie for your kind comments.
    Lyandra - Yes the waves are indeed just another texture. The texture is a closeup from an ocean foam and with few modifications I managed to turn it into waves

    This will be the last WIP for a while so I attached a full resolution version. I will continue after few weeks but as I'm quite far with this already it shouldn't take too long to get it finished...
    Thank you for posting a full resolution version, being able to zoom in and see all those details is great.

  10. #40
    Guild Artisan pasis's Avatar
    Join Date
    Jan 2009
    Location
    Helsinki, Finland
    Posts
    535

    Default

    Continuing this project by adding various details pretty much everywhere. Here is a small sample without and with the added details.
    Attached Images Attached Images
    Last edited by pasis; 08-24-2014 at 05:35 AM.

Page 4 of 5 FirstFirst 12345 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •