Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Aquilonias and Infernian

  1. #1

    Wip Aquilonias and Infernian

    After searching for advice on the internet looking for advice on fantasy mapping, I stumbled upon this site. After looking through the awesome galleries and tutorials I thought I'd put up the progression of my map for the lands of Aquilonias and Infernian for the novel I am writing just now. My first attempt at computerising my old map:

    Click image for larger version. 

Name:	fall of relicia map.jpeg 
Views:	95 
Size:	1.29 MB 
ID:	63875

    After a while I want to completely redraft the map. (Don't like the continent shapes too much, I need room for expansion and it's clear it was drafted on a piece of A4 paper, and it looks to much like Westros for my liking, despite the fact I made it then read A Game of Thones. ) Anyway I wanted to return to an ink-hand drawn piece for it, so I drafted this up on the computer real quick on paint:

    Click image for larger version. 

Name:	map draft.png 
Views:	90 
Size:	734.1 KB 
ID:	63876

    Yeah it was done pretty quickly as a rough sketch so I'm wondering about feedback perhaps on overall continent/country shapes. I know its not much, there's no mountains, settlements or rivers yet, but I plan to do another draft by hand with pencil and scan the results up for you when I do. Also: 1. The chalky grey smudges are mountains, bear with me! 2. The "mortlands" basically represents an area destroyed by a magical volcano several hundred years ago, think wasteland. 3. Blank spaces are for places I haven't thought about yet, such as the big land to the west, but I know I want to fill up (hence the expansion space). 4. I planned to do a scaled up map of Acarnvas (the island to the east) at some point because it is the focal point of my book.

    Thanks for reading, and I'll get that second draft up as soon as I can!

  2. #2
    Community Leader Gracious Donor
    Facebook Connected
    Diamond's Avatar
    Join Date
    Jul 2009
    Location
    SF,CA,USA
    Posts
    3,129

    Default

    Hey, welcome to the Guild and thanks for jumping right in with a map. That deserves some rep right off the bat. You are definitely not alone in rethinking and redesigning your conworld. If I had a nickel for every time I redrafted a map...

    Anyway, looking forward to seeing the progress.
    "I like a look of agony, because I know it's true."

    -Emily Dickinson

  3. #3
    Guild Adept
    Join Date
    Jan 2014
    Location
    Lisbon
    Posts
    296

    Default

    Welcome. Your initial map reminds me so much of my first conworld map, 20 years back - a huge ridge in the north and then a quasi-rectangle peninsula with a couple of islands. Maybe there's 1000's of con-peninsulas with con-islands and con-northern mountain ranges splitting it from the rest of the world out there

    Anyway, a quick advice for your drafting - set some kind of scale: either linear or a graticule (latitude-longitude). This will become very handy as you compare back and forth your map with real locations, when you try to work out climates or when you try to figure traveling distances and the like.

  4. #4

    Default

    Quote Originally Posted by Pixie View Post
    Welcome. Your initial map reminds me so much of my first conworld map, 20 years back - a huge ridge in the north and then a quasi-rectangle peninsula with a couple of islands. Maybe there's 1000's of con-peninsulas with con-islands and con-northern mountain ranges splitting it from the rest of the world out there

    Anyway, a quick advice for your drafting - set some kind of scale: either linear or a graticule (latitude-longitude). This will become very handy as you compare back and forth your map with real locations, when you try to work out climates or when you try to figure traveling distances and the like.
    Thanks for that, I'll add that in! Before I took Acarnvas being roughly Britain-sized as a guide.

    With a lack of an A3 scanner here is my drafted map on A3 paper, looked at some tutorials on how to stitch bigger maps together so I'll try that in future.

    Click image for larger version. 

Name:	Map 2nd draft outline smaller.png 
Views:	68 
Size:	3.07 MB 
ID:	63920

    Already started the detailing of mountains and rivers, starting with the north west, I'll put up my progress as I go along!

  5. #5
    Guild Adept
    Join Date
    Jan 2014
    Location
    Lisbon
    Posts
    296

    Default

    Hmm, I just did a quick calculation based on this last map. If Acarnvas (the small island on the eastern limit of the map) is the size of Britain, then your map stretches from the north pole to just a few degrees south of the equator and aproximately 1/3 of the whole northern hemisphere.

    It is a huge continent, then.

  6. #6

    Default

    I only have an A4 scanner, too. Here is what I do to get a good result:
    - Draw liitle crosses in your map.
    - Scan
    - Put the 2 (or more) scans in different layers and set the upper ones on multiply
    - now you can move and transform them until all the crosses are exactly on the same spot
    - use a soft eraser to erase the edges of higher layers and a hard eraser to erase the crosses.
    This of course only works if you use PS or something similar.

    Great outlines.

  7. #7

    Default

    Thanks for that! I have GIMP and I am a bit for a beginner with it, but I'm sure I'll be able to follow those steps. Though could you perhaps tell me what you mean by "multiply?"

    Cheers.

  8. #8

    Default

    Quote Originally Posted by Pixie View Post
    Hmm, I just did a quick calculation based on this last map. If Acarnvas (the small island on the eastern limit of the map) is the size of Britain, then your map stretches from the north pole to just a few degrees south of the equator and aproximately 1/3 of the whole northern hemisphere.

    It is a huge continent, then.
    Just saw that there, were you using the first draft (the paint one) or the hand drawn one, cause I might have scaled Acarnvas up a bit (or scaled the rest of the map down depending on how you look at it.) If your using the second one, that's good news to me because I wanted most of the south to be arid/deserty anyway, I'll show which bits are desert hopefully when I get round to detailing that part. Cheers!

    EDIT:

    A rough 5min sketch of the continent in the planet, hopefully it fits to the proportions you descibed. I sketched in where I want desert areas but I'll do a proper climate map at some point. Not to sure about desert in the north west though, might be too far up. Also threw in ideas for other continent shapes but they won't be too important considering they'll never be discovered in my fantasy world, unless I do a colonial style follow up.

    Click image for larger version. 

Name:	desert rough sketch.png 
Views:	48 
Size:	3.46 MB 
ID:	63921
    Last edited by Aquilonian; 05-10-2014 at 08:26 AM.

  9. #9
    Guild Artisan Gracious Donor Lingon's Avatar
    Join Date
    Dec 2012
    Location
    Sweden
    Posts
    876

    Default

    About the stitching, I used to do pretty much the same but without the crosses and multiply (which is a blend mode in Photoshop, not sure if GIMP has the same thing, but it means that light colors become transparent and dark become opaque). I found that it works fine to just match the edges of the drawing up, and soft-erase to hide the transition.

    On to your map The shape of the continent is great, it looks natural and really cool. The detail of the coastline is too even, though; try to vary between detailed and smoother areas. One real-world example I've used before is the Mediterranean Sea.

  10. #10

    Default

    Thanks for the feedback guys, taken it on board.

    Not posted in a while due to exams, they're are done now so here is the latest update for the close up for the first draft, starting with the north west of the map:

    Click image for larger version. 

Name:	Anúvar and Relicia close up.png 
Views:	50 
Size:	518.3 KB 
ID:	64330

    Also I've scanned it up and drawn round the borders and stuff, creating a template for doing things like topographical and climate maps. This will help place settlements, forests and cultures.

    Click image for larger version. 

Name:	Coloured Blank.jpeg 
Views:	82 
Size:	778.5 KB 
ID:	64331

    Next up: finishing off all the mountainous regions in the entire map so I can start work on a topographical one in GIMP and then ocean and wind currents.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •