Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Inkscape strategies: line/paths vs. calligraphic tool

  1. #1
    Guild Novice carlaz's Avatar
    Join Date
    Nov 2007
    Location
    Bogotá, Colombia
    Posts
    7

    Post Inkscape strategies: line/paths vs. calligraphic tool

    Hi all, this is my first real post here outside the new members' intro section

    I'm trying to get going with sketching out a new world-level (or continent-level, anyway) map using Inkscape. I'm keen on the advantages of vector-based drawing to make scaling up or down for later, more or less detailed map versions. I thought I'd start by aiming for a basic "fantasy novel insert map" style, Tolkienesque, with a simple line-based coastlines and rivers and then some drawn in stylized mountains and forests and such like. Inkscape seems well placed to do that.

    I did a little experimentation with Inkscape's calligraphic tool, but found i difficult to draw a whole coastline in one go (I'm working with a mouse here!), and failed miserably in trying to figure out how to join up the separate shapes created by drawing the coastline in multiple sections into one continuous calligraphic shapes. (I later learned more about joining end nodes in simple lines while playing with them, so I might be able to go back and try again ... but it seemed tricky at my current skill level!)

    I decided it would certainly be much easier to just draw simple freehand lines that could then be edited and tweaked into shape if desired. It was easier to figure out how to join up different sections of simple lines! But now I wonder if there's a clever way to transform a simple line path into a calligraphic shape that follows the line? So, basically, the idea would be to draw a complete outline as a simple line, but then apply some transformation that made it as if I had drawn the complete line using the calligraphic tool?

    Just an idle question, really! Seemed like it might be an easier way of creating a calligraphic effect coastline outline, etc. (at least until I learn more about how to join up separately drawn calligraphic segments!).

    As an aside, I'm starting my all-new digital cartographic adventures by sketching over some imported bitmaps scanned from earlier versions of my world's hand-drawn maps. (Naturally, I've thought of various changes that need to be made to the geography so they'll be introduced in my new digital version. )

  2. #2
    Community Leader pyrandon's Avatar
    Join Date
    Feb 2007
    Location
    Michigan, USA
    Posts
    1,341

    Default

    I can't help you with Inkscape, carlaz, but I'd like to pop in and recommend the 75-100 dollar investment in a Wacom pad. A cheap investment that is amazingly useful for maps--plus tons of fun for other apps and uses, too!

    Good luck!
    Don
    My gallery is here
    __________________________________________________ _______
    "Keep your mind in hell, but despair not." --Saint Silouan [1866-1938]

  3. #3

    Post

    Quote Originally Posted by carlaz View Post
    I did a little experimentation with Inkscape's calligraphic tool, but found i difficult to draw a whole coastline in one go (I'm working with a mouse here!),
    You can always increase the "mass" setting of the calligraphic brush; it should make the line much less sensitive to mouse jerkiness.

    Quote Originally Posted by carlaz View Post
    and failed miserably in trying to figure out how to join up the separate shapes created by drawing the coastline in multiple sections into one continuous calligraphic shapes.
    Select all individual shapes and press <ctrl> + <+>. You might need to edit the nodes in the junction to make them smoother.

    Quote Originally Posted by carlaz View Post
    I decided it would certainly be much easier to just draw simple freehand lines that could then be edited and tweaked into shape if desired. It was easier to figure out how to join up different sections of simple lines! But now I wonder if there's a clever way to transform a simple line path into a calligraphic shape that follows the line? So, basically, the idea would be to draw a complete outline as a simple line, but then apply some transformation that made it as if I had drawn the complete line using the calligraphic tool?
    Select the unified line, duplicate it (ctrl+d), move the copy a little to the side, select both the original and the copy, join the shapes (ctrl+k), create an edge between the ends on both side of the line and fill the shape with some color.

  4. #4

    Post

    Quote Originally Posted by FabioCapela View Post
    Select the unified line, duplicate it (ctrl+d), move the copy a little to the side, select both the original and the copy, join the shapes (ctrl+k), create an edge between the ends on both side of the line and fill the shape with some color.
    I tend not to use the calligraphy tool for map outlines - only for "drawing". I would suggest following FabioCapela's suggestion to create a "calligraphic pen" effect from bare strokes. I like to use the pencil (freehand) tool to draw my basic shape, simplify it (Ctrl-L) a few times then fractalize it (Effects->Modify Paths->Fractalize).

    Then make the offset and combine them with Path->Exclusion and set the fill to what you want your coast to be like.

  5. #5
    Guild Artisan su_liam's Avatar
    Join Date
    Aug 2007
    Location
    Port Alberta, Regina(IRL: Eugene, OR)
    Posts
    798

    Default

    Every time I use effects on Inkscape it gives me a message saying, "The inkex.py module requires PyXML. Please download the latest version from <http://pyxml.sourceforge.net/>." I've downloaded pyxml, I just can't figure out where to put it to make it accessible to Inkscape.

  6. #6

    Post

    Quote Originally Posted by su_liam View Post
    Every time I use effects on Inkscape it gives me a message saying, "The inkex.py module requires PyXML. Please download the latest version from <http://pyxml.sourceforge.net/>." I've downloaded pyxml, I just can't figure out where to put it to make it accessible to Inkscape.
    What platform are you using? On windows, I have had the best success with the latest dev version from here:
    http://inkscape.modevia.com/win32/?M=D

    as it states:
    Inkscape Win32 builds are listed as InkscapeYYMMDDHHMM.7z. These are the complete runnable distributions, with all support files and locales included. To use, just unzip the inkscape directory onto your hard drive and run. Note: we recently changed from using .zip files to 7-zip. Although you will need 7-Zip to unpack these, I think you will agree that the much smaller file sizes are worth the effort. These files are about half the size of the .zips
    -Rob A>

  7. #7
    Guild Novice carlaz's Avatar
    Join Date
    Nov 2007
    Location
    Bogotá, Colombia
    Posts
    7

    Post

    Quote Originally Posted by pyrandon View Post
    I can't help you with Inkscape, carlaz, but I'd like to pop in and recommend the 75-100 dollar investment in a Wacom pad. A cheap investment that is amazingly useful for maps--plus tons of fun for other apps and uses, too! Good luck!
    Thanks -- I have heard good things about the Wacom pads, and it's definitely something I'm keeping in mind. I'm not sure how easy they are to find down in my neck of the woods, and some computer equipment here costs twice what it does in the States (iMacs, for example!), so they might be unreasonably pricey even if I find one ..... But I might score one next time I'm up in the US.

  8. #8
    Administrator Redrobes's Avatar
    Join Date
    Dec 2007
    Location
    England
    Posts
    7,244
    Blog Entries
    8

    Post

    Pyrandon, do you use an A6, A5, A4 or larger tablet. What size do you think is necessary. I have a klutzy A6 one but would like a wacom. I feel A6 is too small and I think most would agree but some people say A5 is ok some say you need larger. Wacom look the best by far esp since they have x64 drivers. Do you think the Intuos is required or is the Graphire is good enough ?

  9. #9

    Default

    carlaz - I picked up a used wacom 3 graphire (6"x8") for $100cdn on craigslist.

    Redrobes - I think that is about A5 and have found it perfect when working standalone on my notebook screen (1400x1050) but is a little small when I am working with an extended desktop (1400x1050 main, 1200x1600 portrait mode secondary screen)

    -Rob A>

  10. #10
    Administrator Redrobes's Avatar
    Join Date
    Dec 2007
    Location
    England
    Posts
    7,244
    Blog Entries
    8

    Post

    I see. I had not thought of that. I guess its the screen size that makes a difference. If you have a large high res screen then your likely to have the image physically smaller in relation to the size of the screen area so that the actual cursor movement is that much smaller. So you need a larger tablet to compensate as the movements on a large tablet scale smaller on screen.

    B.T.W - Rob, I like the festive avatar. Did you see this :- http://www.mitchoconnell.com/glittergraphix2/index.html being Redrobes, perhaps I ought to get one too...

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •