Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: First battlemap - Sand Raiders from Dark Sun 4e

  1. #1

    Default First battlemap - Sand Raiders from Dark Sun 4e

    Hello everyone! I've just started using GIMP and decided to learn how to do battlemaps (including drawing my own tokens - but that will have to wait). This here is a part one of the introductory adventure from the Dungeons and Dragons 4e Dark Sun Campaign Setting book. There will be two (one also in the outdoors and one will be in the tomb) more battlemaps to follow this one. I am still learning how to do stuff and am fully aware that rocks look bad, cart marks don't even look like cart marks and the palm tree looks too out of place and nothing looks like it should look. I know all that, but need to learn on how to improve things. So if anyone have advice - please don't hesitate to share it with me. I use GIMP mostly.

    Here is the sad sad version with explanation of what people are actually looking at.
    *Silt is difficult terrain.

    Sand Raiders 01.jpg

    Here is a clean version, with no grid (because most VTTs have their own).
    Sand Raiders 01 clean.jpg

  2. #2
    Guild Artisan Jacktannery's Avatar
    Join Date
    Jun 2011
    Location
    Dublin, Ireland
    Posts
    924

    Default

    This looks really great RedDragonJr. It's a nice-looking map that would be very easy to understand in a game, and help all players visualise the encounter. It does exactly what it should do.

    ...am fully aware that rocks look bad...
    Your rocks look great! I notice you have a light dropshadow - why don't you double it up if you want the rocks to pop out a bit more. If you instead want the colour of the rocks to be more yellowy-orange like the desert, you can easily do this: 1) duplicate the rock layer & place above; press the button that freezes pixels; choose sandy colour and drag it into the layer so rocks have 1 block colour; change layer to overlay or grain merge and alter opacity to give sandy vibe to rocks.

    ...cart marks don't even look like cart marks...
    True! But cart-marks are really hard. I'd probably use a gravel texture, and with a layer mask make two sinuous lines of gravels.

    ...and the palm tree looks too out of place...
    Have you though about making it four-times bigger? It's not like anyone was going to do much in that corner of the map anyway. I think the reason it looks a little out of place to you is the scale between the sand-dunes, tree and rock. Making the tree bigger and perhaps selecting a sand-texture without sand-dunes might sort this out.

  3. #3

    Default

    This looks really great RedDragonJr. It's a nice-looking map that would be very easy to understand in a game, and help all players visualise the encounter. It does exactly what it should do.
    Thanks for kind words. I think until I myself am satisfied with the outcome, it's not all that great.

    Your rocks look great! I notice you have a light dropshadow - why don't you double it up if you want the rocks to pop out a bit more. If you instead want the colour of the rocks to be more yellowy-orange like the desert, you can easily do this: 1) duplicate the rock layer & place above; press the button that freezes pixels; choose sandy colour and drag it into the layer so rocks have 1 block colour; change layer to overlay or grain merge and alter opacity to give sandy vibe to rocks.
    Changed that up in both ways. Doubled the drop shadow and instead of stealing a sample pixel, I've just cut the shape from the dunes themselves and put it on top with 30% opacity. Looks better now, thank you for mentioning how to do it.

    True! But cart-marks are really hard. I'd probably use a gravel texture, and with a layer mask make two sinuous lines of gravels.
    Too complicated for me. I've yet to grasp the basics of GIMP and VD in general. I did change things up a bit, it still looks way out of place, but a bit better.

    Have you though about making it four-times bigger?..
    I did not, because I was trying to be as close to the original as it was possible. But you did provide a good point - nobody will miss that corner much, so I've enlarged the palm tree.
    Any advice on how to make the dunes pattern look more random ?

    Here is version 0.1a
    Sand Raiders 01 v.1a.jpg

  4. #4
    Guild Artisan madcowchef's Avatar
    Join Date
    Feb 2012
    Location
    Pacific Northwest USA
    Posts
    680

    Default

    I actual like the rocks a lot. As JT said its an effective battlemap, you'll refine your skills a bit and it will be very eye candy like. Sadly I'm unfamiliar with GIMP so I can't give any advice on that front as I have no idea what transfers over and what doesn't. My suggestion for the dunes is search around at CGTextures (a really wonderful resource as you said you plan to do more battlemaps in the future) and find a base texture with the right randomness dark and shadow, its easy to recolor things once you have that.

  5. #5

    Default

    I actual like the rocks a lot.
    The shape or texture or both ?
    As JT said its an effective battlemap, you'll refine your skills a bit and it will be very eye candy like.
    Like most students I WANT IT NOW! See the immediate results instantly is gratifying, to say the least.
    Wow...

    Well, this is MOSTLYFINISHED version of the first map. I don't think I can do any better right now. Need to learn some tricks first. Please do comment and advice if you feel like it.
    Anyone who want to use it - feel free. The adventure is on the page 216 of Dark Sun Campaign Setting book. I'll make sure to do the rest of those maps.

    Sand Raiders 01daek.jpeg
    Here is one from VTT
    VTTshot.png

  6. #6
    Guild Artisan madcowchef's Avatar
    Join Date
    Feb 2012
    Location
    Pacific Northwest USA
    Posts
    680

    Default

    For the wagon tracks I know how I would do it in PS maybe someone who knows gimp better could chime in and say if it translates or not?

    1. I first made a custom brush that is just to dots set apart and then painted on a new layer with my brush control set to directional. This is probably just as easily done by copying the line and placing it again or just drawing two lines, but this way if I wanted more complex wagon tracks it would also work
    Track Sample2.jpg
    and here is what I mean about a more complex shape (I didn't have to calculate the distance between the lines at the corners that was all done by a single brush).
    Track Sample3.jpg

    2. I lowered the fill to 0% (fill is the visibility of what you've drawn but not the effects you apply to it. And added a Bevel Set to down (to make it look like the section is sunk rather than up to make it look raised). I changed the blend mode for the highlights to overlay rather than screen, and lowered the opacity of the shadows a bit down to about 50%.

    3. I then fiddled with the setting a bit, including doing a custom shape for the bevel but these fiddly bits are things best messed with on your own. Play with bevel shape, depth, opacity of the layer etc. till you like the look.

    Here are my results:
    Track Sample.jpg

    Sounds like a lot of steps, but once you get the hang of it it all takes only a couple of minutes at most. Learning beveling tricks will be of infinite help to you in the future for battlemaps.

  7. #7

    Default

    All my rocks seem like they are 'levitating' in the air ? How can I make them look more like normal rocks ?

  8. #8
    Guild Artisan madcowchef's Avatar
    Join Date
    Feb 2012
    Location
    Pacific Northwest USA
    Posts
    680

    Default

    The shadows on an object often give that impression. It helps to use two kinds. a directional one like the drop shadows you used, and a second one that has no direction to it but just extends a very short ways from all side (like the way objects cast an ambient shadow). Lowering the opacity of shadows often helps too.

  9. #9
    Guild Journeyer Raptori's Avatar
    Join Date
    Feb 2014
    Location
    Helsinki
    Posts
    211

    Default

    The problem with a lot of shadows that I've seen is that they just use the Photoshop drop shadow layer style, which really isn't the right thing. If you move it further from the shape, you can see more closely what it actually does - creates a faded and blurred copy of the layer's outline. I copied the shape of one of your rocks to show an example of this:

    drop-shadow.jpg

    In the vast majority of situations, that's not going to look realistic no matter what you do with it. What happens with shadows in real life is more like this:

    drop-shadow-different.jpg

    It's still not exactly right - it assumes the entire rock is of a uniform height, and the gradient from dark to light is linear rather than following the contours of the rock's outline. That last one is the most conspicuous flaw visually. However, it's a lot more realistic than the usual shadows, and doesn't take too much effort. All I did was copy the layer, move it down and to the right, use the polygonal lasso tool to join the new shape's corners to the original one's corners, fill selection with some random colour, apply gradient overlay, set content fill to 0%, and add a gaussian blur. I could screenshot that process at some point if anyone's interested!

    Edit: actually, it's even faster to just use the paintbrush, and I think it looks even better than the changed one above...

    drop-shadow-painted.jpgdrop-shadow-painted-background.jpg
    Last edited by Raptori; 04-05-2014 at 06:53 PM.

  10. #10

    Default

    Quote Originally Posted by Raptori View Post
    I could screenshot that process at some point if anyone's interested! ]
    Me! Me! Pick me!

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •